2.1 Select/Primary Input - Ericsson RX8000 Series Reference Manual

Chapter 3
3. Press Save to save the new settings or Edit to abandon the operation and
To enable/disable the Auto Tune function:
1. Press the Edit key. The cursor appears below the current option.
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.5 2 Input (G703 ATM Input Card RX8XXX/HWO/G703)
The Input menu is used to select the various inputs to the equipment and set input
parameters. To access the Input menu from the System menu, press the
key. The following screen is displayed:
INPUT
2
Note:
3.5.5.1

2.1 Select/Primary Input

To access this function, press the
displayed:
INPUT
2.1
The
input types.
To choose the Select input type:
1. Press the Edit key. The cursor appears below the displayed type (ASI shown
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
To choose the Primary input:
1. Move to the Primary Input function using the
3-40
return to the current setting.
(Up) and
options until the required option is displayed.
return to the current setting.
|UNLOCKED
|---
The G.703 front panel menus may change depending upon the model of
G.703 card fitted, please refer to Ericsson for more information.
|SELECT INPUT
|PRIMARY INPUT G.703
(Forward) and
above).
(Up) and
G.703 and AUTO (dependent on model and option licences obtained).
return to the current setting.
(Down) keys to toggle between the Enabled/Disabled
Mbits/s
(Forward) key. The following screen is
G.703
(Back) keys are used to choose the Select and Primary
(Down) keys to toggle between the available types:
INPUT: G.703
--- >
(Forward) key
EN/LZT 790 0005 R1A
(Down)