Ericsson RX8000 Series Reference Manual page 197

OFDM
OPPV
OSD
Packet
PAL
PAT
PCM
PCR
PDC
Pel
EN/LZT 790 0005 R1A
Orthogonal Frequency Division Multiplex: A modulation technique
used for digital TV transmission in Europe, Japan and Australia;
more spectrally efficient than FDM. In OFDM, data is distributed
over a large number of carriers spaced apart at precise frequencies.
The carriers are arranged with overlapping sidebands in such a way
that the signals can be received without adjacent channel
interference.
Order ahead Pay Per View: An advance purchase of encrypted one-
time events with an expiry date.
On-screen display: Messages and graphics, typically originating
from the SMS, and displayed on the subscriber's TV screen by the
IRD, to inform the subscriber of problems or instruct the subscriber
to contact the SMS.
A unit of data transmitted over a packet switching network. A packet
consists of a header followed by a number of contiguous bytes from
an elementary data stream.
Phase Alternating Line: A colour TV broadcasting system where the
phase of the R-Y colour-difference signal is inverted on every
alternate line to average out errors providing consistent colour
reproduction.
Program Association Table: Part of the MPEG-2 Program Specific
Information (PSI) data and is mandatory for MPEG-2 compliance.
The PAT points (maps) to the PMT.
Pulse Code Modulation: A process in which a signal is sampled,
each sample is quantized independently of other samples, and the
resulting succession of quantized values is encoded into a digital
signal.
Program Clock Reference: A time stamp in the transport stream
from which the Decoder timing is derived.
Program Delivery Control: A Teletext service allowing simple
programming (i.e. VideoPlus) of VCR recording times. If the desired
program is rescheduled, PDC updates the programming information
in the VCR.
Picture Element: Also known as a pixel. The smallest resolvable
rectangular area of an image either on a screen or stored in
memory. On-screen, pixels are made up of one or more dots of
colour. Monochrome and grey-scale systems use one dot per pixel.
For grey-scale, the pixel is energized with different intensities,
creating a range from dark to light (a scale of 0-255 for an eight-bit
pixel). Colour systems use a red, green and blue dot per pixel, each
of which is energized to different intensities, creating a range of
colours perceived as the mixture of these dots. If all three dots are
dark, the result is black. If all three dots are bright, the result is
white.
Annex A
A-13