Ericsson RX8000 Series Reference Manual page 66

Chapter 3
3.5.2.2.1.4 2.2.1.4 Standard/Spectral Sense
To view the status of these parameters, press the
screen is displayed:
STATUS
2.2.1.4
3.5.2.2.1.5 2.2.1.5 Pilot Symbols/Frame Size
To view the status of these parameters, press the
screen is displayed:
STATUS
2.2.1.5
Press the
3.5.2.2.2 2.2.2 Source 1 Configure
This menu allows access to and configuration of various Source 1 Input 1
parameters. To access this function, press the
is displayed:
SOURCE 1
2.2.2
3.5.2.2.2.1 2.2.2.1 LNB LO Frequency
To view and edit the current settings of the Source 1 Low Noise Block (LNB) Local
Oscillator (LO) Frequency, press the
displayed and the Edit key is lit:
SOURCE 1
2.2.2.1
To edit the LNB LO frequency setting:
1. Press the Edit key. The cursor appears below the first number.
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.2.2.2.2 2.2.2.2 Satellite Frequency
To view and edit the current settings of the Source 1 Satellite Frequency, press the
3-18
|STANDARD
|SPECTRAL SENSE
|PILOT SYMBOLS
|FRAME SIZE
(Back) key to return to the S2 Status menu.
|CONFIGURE Input 1 (L-band)
|(UNLOCKED)
|LNB LO FREQUENCY
|00000.000 MHz
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
(Down) key. The following screen is displayed and the Edit key is lit:
(Down) key. The following
(Down) key. The following
---
---
(Down) key. The following screen
(Forward) key. The following screen is
(Back) and
(Up) and
---
---
>
(UNLOCKED)
(Forward) keys
(Down) keys to
EN/LZT 790 0005 R1A