Device Info > Trap Destination Table - Ericsson RX8000 Series Reference Manual

Chapter 5
Figure 5.8 Device Info > Modules Web Page
There are no fields on this page which may be edited by the user. Selecting the
Refresh button will ensure that the latest information is displayed from the current
values of the equipment.
5.2.2.5 Device Info > Trap Destination Table
When an alarm occurs within the equipment, an SNMP Trap message is sent to all
destinations and a list of these destinations is given in this web page.
To view this page, select the Trap Destination button from the Device Info page.
Figure 5.9 Device Info > Trap Destination Table Web Page
To add a new item to this page:
1. Select the Add Item button. The following page is displayed:
Figure 5.10 Trap Destination Table > Add Item Web Page
2. Enter the required values in the appropriate fields or select values from the drop-
3. Select the Add button to add the item to the Trap Destination table.
5-10
down menus.
EN/LZT 790 0005 R1A