Audio/Audio Out Connector; Ethernet/Control Connector - Ericsson RX8000 Series Reference Manual

Software version 4.3.2
Hide thumbs Also See for RX8000 Series:
Table of Contents

Advertisement

2.7.7

AUDIO/AUDIO OUT Connector

All units provide a pair of connectors supplying two
stereo channels. Each carries a single channel stereo
pair in both analogue and balanced digital form.
Table 2.8 AUDIO/AUDIO OUT Connectors
Item
Connector type
Connector designations
Pin-outs
Nominal output impedance
Maximum data rate
Analogue Output level
Load impedance
2.7.8

ETHERNET/CONTROL Connector

All units provide two Ethernet remote control interfaces
for Web Browser Control.
Table 2.9 ETHERNET/CONTROL Connectors
Item
Connector type
Connector designation
Pin-outs
(Unused pins not
connected)
EN/LZT 790 0005 R1A
Specification
9-way, D-type, male
AUDIO OUT 1
AUDIO OUT 2
AUDIO 3 (RX8200 only)
AUDIO 4 (RX8200 only)
Pin 1 – Digital audio +
Pin 2 – Ground
Pin 3 – Left +
Pin 4 – Right +
Pin 5 – Ground
Pin 6 – Digital audio –
Pin 7 – Ground
Pin 8 – Left –
Pin 9 – Right –
50 Ω
3.072 Mbps
+20 dBm nominal clipping
level. Selectable in range 12
to +24 dBm.
≥600 Ω balanced
Specification
RJ-45 (100BaseT)
ETHERNET 1 or CONTROL 1
ETHERNET 2 or CONTROL 2
Pin 1 – Tx Out (+)
Pin 2 – Tx Out (-)
Pin 3 – Rx In (+)
Pin 6 – Rx In (-)
Chapter 2
AUDIO/AUDIO OUT
ETHERNET/CONTROL
2-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents