Ericsson RX8000 Series Reference Manual page 145

Software version 4.3.2
Hide thumbs Also See for RX8000 Series:
Table of Contents

Advertisement

User-editable fields in the Service section:
User-editable fields in the Video section:
EN/LZT 790 0005 R1A
Service Hunt – In this mode, upon the loss of a service the unit will select the
first available service from the service list.
Service Drop – In this mode, if a service is lost its selection data will be dropped
such that the service will not be selected again upon reacquisition.
Major/Minor Tracking – In this mode, the service will be selected/maintained
using the major and minor channels referenced from the VCT.
PID Flush – Checking this box will allow removing the component selections
from the drop-down list if NOT present.
SI Mode – allows selection of auto detect or force DVB or ATSC SI table
filtering.
Detected SI Mode – displays the SI mode detected from currently extracted SI
tables.
User PCR PID – allows the input of the current User PCR PID.
AR (Aspect Ratio) Conversion – allows the selection of the type of aspect ratio
conversion required from a drop-down menu.
Use AFD/Bar (Active format Description) Data – checking this box allows the
use of AFD/BAR data to automatically perform aspect ratio conversion.
AFD/Bar Data Timeout Period – checking this box will cause the AR
conversion to drop to the default setting if AFD/BAR data is not available.
RX Delay 4:2:0 – allows the input of a Receiver delay value in the offset range
of 0-250 ms.
RX Delay Mode – allows the selection of the Receiver delay mode from a drop-
down menu.
Test Pattern - allows the selection of the test pattern displayed from a drop-
down menu.
Video Fail Mode - allows the selection of the display shown in the event of
video signal failure from a drop-down menu.
Video 625 Standard - allows the selection of the 625 composite video standard
from a drop-down menu.
Video 525 Standard - allows the selection of the 525 composite video standard
from a drop-down menu.
User PID – allows the input of the user PID for video decoding.
User Std - allows the selection of the user video standard from a drop-down
menu.
Chapter 5
5-29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents