The Technical Earth is not a Protective earth for electric shock protection.
This unit must be correctly earthed through the molded plug supplied. If the local
mains supply does not have an earth conductor do not connect the unit. Contact
Customer Services for advice.
Before connecting the unit to the supply, check the supply requirements in Annex B
of the Reference Guide.
2.4
Rear Panel Connectors
Always use the specified cables supplied for signal integrity and compliance with
EMC requirements (see the Reference Guide).
Note:
Figure 1
Figure 2
EN/LZT 790 0008/1 R1A
2011-03-30
Rear panel connectors may differ, depending on the options selected.
RF IN 1-4
ASI OUT 1-2 CVBS
ASI INPUT
Rear Panel Connectors (RX8310/BAS with RX83XX/HWO/IP/OUT)
RF IN 1-4
ASI OUT 1-2 CVBS
ASI INPUT
Rear Panel Connectors (RX8315/BAS with RX83XX/HWO/IP/OUT)
Warning!
IP OUT 1-2
AUDIO OUT (1)
1-2
ETHERNET 1-2
ALARM
IP OUT 1-2
AUDIO OUT (1)
1-2
ETHERNET 1-2
ALARM
Installing the Equipment
AC POWER
TECHNICAL
EARTH
AC POWER
CA
TECHNICAL
INTERFACE
EARTH
9 (40)