Canon OPTURA 100 MC NTSC Instruction Manual page 97

When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
q
MENU _.vc,SET UP /)_) _.OUTPUT C,...L.',
J
( [2221 3 7)
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UE Then select OUTPUT CH,
set it to the desired setting and close the menu.
" Refer to the following list.
OUTPUT CH setting Played back sound
Tape recorded with
stereo sound
Tape recorded on
multiple channels
L/R L+R channels main + sub
L/L L channel only main only
R/R R channel only sub only
m
97