Canon OPTURA 100 MC NTSC Instruction Manual page 75

Set the shutter speed manually to take stable shots of quickly moving subjects,
TAPE
AUTO
1/60
1/100
1/250
1/500
1/1000
1/2000
1/4000
1/8000
4- 4-
MENU
[_cA. SETUP )} ,SHUTTE, ..... AUT0
¢ [:_ 37)
L
1. Make sure tile camcorder is set to tile [] (program AE) mode.
2. Press the selector dial in and choose AUTO from the program
menu.
3. Open the menu and select CAM.SET UP.
4. Select SHUTTER.
5. Press the selector dial in to select the desired shutter speed.
CARD
AUTO
slower 1/60
1/100
1/250
1/500
faster
, Only shutter speeds up to 1/500 are available when using a memory card.
6. Close tile menu.
:De
o7
_=
et
Concerning shooting in fluorescent lighting
When the camcorder is set to D (Easy Recording) or the Auto recording program
in TAPE CAMERA mode, it automatically detects the flicker of fluorescent
lighting and adjusts the shutter speed to compensate. However, if the brightness
of the LCD or view-finder display starts to flicker, make sure the camcorder is set
to the Auto recording program and select the 11100 shutter speed,
75