Canon OPTURA 100 MC NTSC Instruction Manual page 24

The camcorder's l 0× zoom lens allows you to choose the best picture angle for
each scene (up to 8x when using a memo U card):
. Move the zoom control towards W to zoom out to wide-angle,
° Move it towards T to zoom in to telephoto,
You can also control the speed of zooming:
° Move the control slightly to zoom slowly,
• Move it farther to zoom more quickly, (The flu-ther you move the zoom control,
the faster the zoom speed.)
The T imd W buttons on the wireless controller adjust the picture angle, but not
the zoom speed.
{N@ iig
,:
}{{{{{
1{ 1i[1[{ [ [ [ [ 1[ { ; i
Magnifies the camcorder's zoom range by up to 20× in TAPE CAMERA mode,
The zoom control continues to work as usual, You can freely zoom in and out
between l x and 200× magnification -- the camcorder automatically switches
between optical zooming (up to 10×) and digital zooming (10× to 40× or 10× to
200×).
24
+
F
MENU
/'CAM.SET
t ip _ "D.Z00M ...... 40X
_ 371
L
To change the digital zoom, open the menu and select CAM.SET UP.
Then select D.ZOOM, set it to OFF or 200× and close the menu.
[] Notes:
" When zooming, its a rule, keep at least 3 ft 3_/sin (l m) between you and your
subject. However when the zoom is at the wide-angle position, you can focus
on a subject its close as s/_in (1 cm).
. hnage resolution is sliglltly lower when the magnification is greater than 10×.
. You cannot use digital zoom when the multi-image screen or mosaic is set, The
display becomes ....
• The zoom indicator appears for 4 seconds. When the digital zoom is set to 40×,
the zoom indicator extends (ligllt blue), When the digital zoom is set to 200×
zoom, the zoom indicator extends again (a darker blue),