Canon OPTURA 100 MC NTSC Instruction Manual page 111

iiiiiiili[_iiiiiiiiiill
-I- _222222222222222222_'_
1. With an image in the display, press the selector dial in to open the
FILE OPER. menu.
• PROTECT 0.,, PRINT MARK /'_, and IMAGE ERASE settings appear
, If you select *"RETURN, the menu disappears from the display.
[To protect an image ]
2. Select PROTECT o-,, and press tile selector dial in.
, The O.,, protect mark appears on the image.
, Now- you are unable to erase this image.
• Press the selector dial again to cancel it.
• If you select 1,,,RETURN, the menu disappears fiom the display.
• To cancel hnage protection, select PROTECT O-,, and press the selector dial
in.O.,, disappears and now- you can erase this image.
To mark a for (Print Mark) ]
image Printing
2. Select PRINT MARK _ and press the selector dial in.
, The _ print mark appears on the image.
, Press the selector dial again to cancel it.
, If you select _RETURN, the menu disappears from the display.
, To cancel a print mark, select PRINT MARK €'_ and press the selector dial
in. _ disappears.
[To erase the image ]
2. Select IMAGE ERASE and press the selector dial in.
• ERASE THIS IMAGE'? NO YES appears in the display.
• If you select *'RETURN, the menu disappears from the display.
3. Select YES and press the selector dial in.
• The image is erased.
• One image before the erased image appears.
c
iN
3
0
0
7,
111