Canon OPTURA 100 MC NTSC Instruction Manual page 23

i//iiii/i/illitl/ti/ti/ti/tii ¸iiiiiiii
The tally lamp lets you know that the
camcorder is recording, receiving
signals from the wireless controller or
counting down for the self-timer
However, its flashing may be reflected
into the lens during close-up recording,
or when recording through glass.
You may therefore decide to turn it off.
+ +
1)> _TA,LY LA.P..0.
MENU
_SYSTEM
J
( _ 37)
+
To turn the tally lamp off, open the menu and select SYSTEM. Then _
select TALLY LAMP, set it to OFF and close the menu. _ g
. The tally lamp no longer flashes during recording, but it will still light up when _
the camcorder receh:es a signal from the wireless controller and during the self- g
thner countdown,
The camcorder's short operation confirmation beeps am indicated by ,? in the
illustrations. Beeps sound upon certain camcorder operations such as when you
turn the camcorder on, during the self-timer countdown, right before the
camcorder's automatic shut-off, and also upon any unusual condition of the
camcorder Beeps am not recorded on the tape.
+ +
]
MENU
/)>
_BEEP ........ ON
_SYSTEM
([]3 3 71
J
To turn the beep off, open the menu and select SYSTEM. Then select
BEEP, set it to OFF and close the menu.
23