Canon OPTURA 100 MC NTSC Instruction Manual page 86

Digital video equipment fitted with the DV terminal lets you edit, copy and
transfer data digitally, with virtually no generation loss in image and sound
quality. The DV terminal is for both line-in and line-out, since a single DV cable
can handle data in both directions.
° [f a digital VCR is connected and an anomalous signal is sent from the VCR,
the images recorded on the tape may also be anomalous (although it may not
appear so on the TV hnage), or not recorded at all.
° You are unable to dub tapes recorded with the copyright protective signal.
"13
W
ii i i_ iii il _ ii! i ! _ ii! i ! _ ii! i ! _ ii! i! _ ii!iii!!i_iiiiii!iii!!i_iiiiii!iii!!i_iiiiii ii!i_iiiiii ii!i_iiii ......................
[ Example dubbing to the camcorder ]
1. Connect the eameorder and the other digital device.
, Connect the Canon CV-150F DV cable (optional) with the sides of the plugs
marked with the arrows fitcing as shown above.
2. Prepare the other device.
, Tnrn on the power and load a recorded cassette.
3. Turn the eameorder's POWER switch to PLAY (VCR), and move
the eameorder's TAPE/CARD switch to TAPE.
, DV IN appears in the display.
4. Load a blank cassette.
86