Canon OPTURA 100 MC NTSC Instruction Manual page 63

Digital effects can b e set with the c ontrols on the b ody ofthe c amcorder or the ilii[] _
wheless controllel: Pressing the A/Y buttons on the wireless controller
correspond to tuming the selector dial up and down, and pressing the SET button
corresponds to pressing the selector dial in.
Sound and image fade together.
When operating faders, make sure the program selector is set to IN.
+
Select fader I
1. Press tile DIGITAL EFFECTS button to open tile digital effects
lnenu.
• D.EFFECT _, FADER, EFFECT and MULTI-S appear.
2. Select FADER.
, FADE-T. WIPE _l, STRIPE _l, STRIPE '-, CHECKER, WINDOW settings
appear.
3. Select the desired setting.
, You return to the digital effects menu.
4. Press the DIGITAL EFFECTS button to close the menu.
, The name of your selected fader flashes in the display.
[ Fader on/off I
5. Press the ON/OFF button.
, The name of your selection stops flashing.
, Each thne you press the ON/OFF button, the chosen fader is actiwtted
(display lights continuously) or deactiwtted (display flashes).
6. Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
20C
o_
m
63