Canon OPTURA 100 MC NTSC Instruction Manual page 132

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!ii_i!_ii_i:il
is free of dust and moisture, and where tile temperature is no higher than 86°F
(: 0 C). After storage, check each part and function of your camcorder to make
sure everything is still working properly.
[] Note:
, These cautions also apply to accessories such as battery packs and cassettes.
Viewfinder
• Clean the viewfinder screen using a cotton
swab. Fflst, pull tile viewfinder out until it
stops. Then, press and hold the finder
release button with a sharp object and pull
tile viewfinder itll the way out. To reitttitch
the view-finder, first position tile base
horizontally and align it with the
view-finder's base. Then press it until it
clicks bitck illto place.
, Tile viewfinder screen scratches easily.
Take care when cleaning.
LCD .............................................................................................
, Clean the LCD screen using a commercially available cleaning cloth for glasses.
, Where there is a big change in temperature, moisture may form on the surface
of the screen. Wipe clean with a soft, dry cloth.
• At low- temperatures the display may appear to be much darker than usual. This
is not a fault, and its the screen warms up the display will return to normal.
Camcorder body and lens
• Use a soft, dry cloth to clean the camcorder body o1 lens. Never use chemically
treated cloth or volatile solvents such as paint thinner
o_
132