Canon OPTURA 100 MC NTSC Instruction Manual page 94

[] Notes:
• When using an external microphone "*' Connect it to the microphone
terminal.
When using tile DM-50 micr_plmne "*' Make sure nothing is connected to
the microphone terminal,
When using tile built-in microphone _ Make sure nothing is connected to
either the microphone terminal or the
accesso U shoe,
. To use your TV to monitor video, connect the S-video terminal ( [_] 32) or the
AV terminal (use only the video plug) to your TV. You can monitor the sound
with headphones ( [Jl] 31 ).
Turn the camcorder's POWER switch to PLAY (VCR) and move the camcorder's
TAPE/CARD switch to TAPE, Load a recorded cassette,
. Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position),
LU
94
Do not connect!disconnect any cables to/from the camcorder when dubbing audio
or preparing to dub audio,
F
MENU /,vcR SET UP )) ,AUO,O OUB ..AUOIO ,,
( {_ 37)
L
1. Open the menu and select ¥CR SET UP.
2. Select AUDIO DUB.
3. Select AUDIO IN or MIC. IN and close the menu.