Canon OPTURA 100 MC NTSC Instruction Manual page 14

6. Remove the battery pack after use.
• Press the BATT. RELEASE button and remove the battery.
[] Notes:
, Never connect an unspecified product to the camcorder's DC terminal.
Likewise, do not connect the power adapter to an unspecified product.
, You can find detailed notes for using the batteries in the "Notes on Using the
Batteries" (_ 128). These notes include charging and recording times and how
to install the backup batte U.
i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i
Specifications
Power supply 100-240 V AC, 50160 Hz
Power consmnption 34 W
Rated output 9.5 V. 2.7 A DC
Operating temperature range 32°F-104°F (0°C-40°C)
Dimensions 2 I10× 1 I/s × 4 I/s in (57 × 28 × 104 ram)
Weight 6 ?/s oz (180 g) (without power cable)
Weight and dimensions are approximate.
Errors and omissions excepted.
Subject to change without notice.
When replacement of power supply is required, please return it to the
responsible nearest Canon Service Center and please replace it with the same
type number CA-560 or equivalent.
The Adapter can be used with a power supply between 100 and 240 V AC. For
areas where 120 V AC power is not used, you will need a special plug adapter
Contact your nearest Canon Service Center for further information.
14