Canon OPTURA 100 MC NTSC Instruction Manual page 138

[] Tile image cannot be erased.
• The memo U card is frill. Erase
images (_1110) or insert a new-
memory card.
, You have reached the maximum file
number Set the file numbering to
RESET through the menu ( _] 102)
and insert a new- memo U card.
• You ale using an unformatted
memory card. Format the card
(_1122).
, The image is protected ([_ 109).
, You am using an SD Memo U Card
and it is set for erasure prevention.
Change the position of the protect
switch.
Problem
[] The wireless controller doesn't
work.
[] The power indicator is flashing.
[] The camcorder malfunctions.
[] The DV cable is connected
._ correctly, but there's nothing in
o _ the display.
:_ _ [] The camcnrder becomes warm
--_ during use.
Cause and/or what to do about it
• The remote sensor mode is set to
OFF(',(_ in the menu ([222146).
• The remote sensor modes of the
wireless controller and the camcorder
itself are different ( E2346).
• The batteries are dead or not inserted.
• Check the screen displays (_ 143).
, External interference may cause the
canlcorder's microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
sonrce.
• Remove the cable and then reconnect
it or turn the power off and back on
again.
, This is not a malfunction.
138