Canon OPTURA 100 MC NTSC Instruction Manual page 25

¸, / i,
iiiiiii!iij!!!i!iiii
Push the LCD panel OPEN button and
open the panel by pulling it away from
the camcorder This automatically
switches the LCD screen on and the
viewfinder off. When you close the
LCD panel, the LCD screen
automatically switches off and the
viewfinder switches back on.
You can choose the angle of the screen
that suits you best by opening and
rotating the screen, also you can rotate
the LCD screen so that faces in the
direction of the lens ( _21 27).
You can also push the panel flat
against the camcorder until it is flush
with the side, with the screen facing
outwards.
[] Notes:
• Avoid touching the LCD screen when moving the LCD panel.
• Do not hold the camcorder by the LCD panel or the viewfinder
• Make sure you open the LCD panel at 90 °, before attempting to rotate it.
• Always rotate the LCD panel vertically into place, before closing it or pushing
it flat against the side of the camcordec
• Always fully close the LCD panel until it clicks securely.
• Be careful not to leave the LCD, view-finder or lens exposed to direct sunlight
outdoors or in a window. Doing so could cause damage.
25