Canon OPTURA 100 MC NTSC Instruction Manual page 81

i` `iJ`i ` `!ii` `iJ`iiiiJ`i ` `iiiiiiii
You can also choose to display camcorder data (slmtter speed and exposure
settings) in cassette dittit codes.
-I-
MENU [,-D,SP.SET up
( _ 37)
_)_DATA CODE.,.DATE,'TIME
To change, open the menu and select DISESET UP. Then select DATA
CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and
close the menu.
Possible data code combinations for cassettes:
DATA CODE
"'''"_ (cassette Date/Time Camera data Date/Time &
Camera data
D,'TIME SEE.
Date
Time
Date & Time
[] Notes:
. The data code will read "- - -" in the following situations:
- During playback of a blank section of tape.
- If the tape was recorded before entering the date and tbne in the camcorder's
memory.
- If the tape was recorded on a camcorder without a data code fnnction.
- If noise or tape damage prevents the data code from being read.
, If a recording made on OPTURAI00 MC is played back on a different DV
camcorder the data code may not be displayed correctly.
, The data code will appear in the display even if DISPLAYS (_1143) has been
set to OFF through the menu.
_c
_=
e:
81