Canon OPTURA 100 MC NTSC Instruction Manual page 80

A data code, containing the date and time the recording was made and other
camcorder data (shutter speed and exposure settings) is automatically recorded on
it special data section of the tape.
• Only the date and time appear in the data code when using a memo U card.
0a
t_ la.,
._=
e-
During TAPE PLAY (VCR) mode, the data code can be displayed o1 hidden while
the camcorder is in play, slow- or still mode.
Camcorder data may be displayed as "- - -" during fast forward, rewind, reverse
playback, forwitrd imd reverse ×2 plitybitck.
Press the DATA CODE button. When using a cassette, press it while
the camcorder is in play, slow or still mode.
• Press it once to display, once more to hide it.
Select whether you want the date, the time, or both to show up on your data code
display ( _ 81).
+ +
MENU(c_37) [ ,.D,SP.SET UP
_ _D,'TIME SEL.,DATE & TIME
To change the date and time combination, open the menu and select
DISP.SET UP. Then select D/TIME SEL., set it to DATE, TIME or
DATE & TIME and close the menu.
80