Download  Print this page

Canon Optura 100MC Instruction Manual

Power adapter cr-560 instruction manual.
Hide thumbs
   

Advertisement

CAUTION:
TO REDUCE-THE-RISK-OF-ELECTRIC-SHOCK, DO-NOT REMOVE-COVER-(OR
BACK). NO USER-SERVICEABLE-PARTS-INSIDE. REFER SERVICING
TO-QUALIFIED-SERVICE PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
The serial number of this product may be found on the bottom. No others have the
same serial number as yours. You should record the number and other vital
information here and retain this information as a permanent record of your purchase
to aid identification in case of theft.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No. CR-560
Serial No.
When the replacement or the repair of the Charge Adapter/Car Battery Cable Kit
CR-560 (CG-560+CB-560) is required, please return it to the responsible nearest
Canon Service Center.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
CR-560A
"This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard
entitled "Digital Apparatus," ICES-003 of the Industry Canada."
CR-560A
"Cet appareil numérique respecte les limites de bruits radioélectriques applicables
aux appareils numériques de Class B prescrites dans la norme sur le matériel
brouilleur: "Appareils Numériques," NMB-003 édictée par l'Industrie Canada."
CR-560A
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you could
be required to stop operation of the equipment.
Hinweise für Deutschland
Batterien und Akkumulatoren gehören nicht in den Hausmüll !
Im lnteresse des Umweltschutzes sind Sie als Endverbraucher gesetzlich
verpflichtet (Batterieverordnung), alte und gebrauchte Batterien und
Akkumulatoren zurückzugeben. Sie können die gebrauchten Batterien an den
Sammelstellen der öffentlich-rechtlichen Entsorgungsträger in Ihrer Gemeinde
oder überall dort abgeben, wo Batterien der betreffenden Art verkauft werden.
Die Batterien werden unentgeltlich für den Verbraucher zurückgenommen.
IMPORTANT-SAFETY INSTRUCTIONS
For CG-560
In these safety instructions the word "product" refers to the Charge Adapter
CG-560.
1. Read Instructions – All the safety and operating instructions should be read before the product is
operated.
2. Retain Instructions – The safety and operating instructions should be retained for future reference.
3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions – All operating and maintenance instructions should be followed.
5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. The product should be cleaned only as recommended in this manual.
6. Accessories – Do not use accessories not recommended in this manual as they may be hazardous.
7. Avoid magnetic or electric fields – Do not use the camera close to TV transmitters, portable
communication devices or other sources of electric or magnetic radiation. They may cause picture
interference, or permanently damage the camera.
8. Water and Moisture – Hazard of electric shock – Do not use this product near water or in rainy/moist
situations.
9. Placing or Moving – Do not place on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the
product.
A product and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and cart combination to overturn.
10. Power Sources – The product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supply to your home, consult your product
dealer or local power company. Regarding other power sources such as battery power, refer to
instructions in this manual.
11. Polarization – The product is equipped with a polarized 2-prong plug (a plug having one blade wider
than the other).
The 2-prong polarized plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
12. Power Cord Protection – Power cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them. Pay particular attention to plugs and the point from
which the cords exit the product.
13. Outdoor Antenna Grounding – If an outside antenna is connected to the product, be sure the
antenna is grounded so as to provide some protection against voltage surges and built-up static
charges. Section 810 of the National Electrical Code, ANSI / NFPA No. 70–1984, provides
information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
See figure 3.
IMPORTANT-SAFETY INSTRUCTIONS
For CB-560A
In these safety instructions the word "product" refers to the Charge Adapter
CB-560.
1. Read Instructions – All the safety and operating instructions should be read before the product is
operated.
2. Retain Instructions – The safety and operating instructions should be retained for future reference.
3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions – All operating and maintenance instructions should be followed.
5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. The product should be cleaned only as recommended in this manual.
6. Accessories – Do not use accessories not recommended in this manual as they may be hazardous.
7. Avoid magnetic or electric fields – Do not use the camera close to TV transmitters, portable
communication devices or other sources of electric or magnetic radiation. They may cause picture
interference, or permanently damage the camera.
8. Water and Moisture – Hazard of electric shock – Do not use this product near water or in rainy/moist
situations.
9. Placing or Moving – Do not place on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the
product.
A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
10. Power Sources – The product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supply to your home, consult your product
dealer or local power company. Regarding other power sources such as battery power, refer to
instructions in this manual.
11. Polarization – The product is equipped with a polarized 2-prong plug (a plug having one blade wider
than the other).
The 2-prong polarized plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
12. Power Cord Protection – Power cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them. Pay particular attention to plugs and the point from
which the cords exit the product.
13. Outdoor Antenna Grounding – If an outside antenna is connected to the product, be sure the
antenna is grounded so as to provide some protection against voltage surges and built-up static
charges. Section 810 of the National Electrical Code, ANSI / NFPA No. 70–1984, provides
information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
See figure 3.
Fig. 3
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
14. Lightning – For added protection of this product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
disconnect it from the wall outlet and disconnect
GROUND
CLAMP
the antenna. This will prevent damage to the
product due to lightning and power-line surges.
ANTENNA
DISCHARGE
UNIT
15. Power Lines – An outside antenna system should
(NEC SECTION
810-20)
ELECTRIC
not be located in the vicinity of overhead power
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
lines or other electric light or power circuits, or
(NEC SECTION 810-21)
GROUND CLAMPS
where it can fall into such power lines or circuits.
POWER SERVICE
GROUNDING ELECTRODE
When installing an outside antenna system,
SYSTEM
(NEC ART 250. PART H)
NEC - NATIONAL ELECTRICAL CODE
extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
16. Overloading–Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.
17. Objects and Liquid Entry – Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short out parts that could result in a fire or electric
shock. Be careful not to spill liquid of any kind onto the product.
18. Servicing – Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service – Disconnect this product from the wall outlet and all power sources
including battery, and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If any liquid has been spilled onto, or objects have fallen into, the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally even if you follow the operating instructions. Adjust only
those controls that are covered by the operation instructions. Improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance. This indicates a need for service.
20. Replacement Parts – When replacement parts are required, be sure the service technician has used
replacement parts that are specified by Canon or that have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21. Safety Check – Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks to determine that the product is in safe operating order.
Fig. 3
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
14. Lightning – For added protection of this product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
disconnect it from the wall outlet and disconnect
GROUND
CLAMP
the antenna. This will prevent damage to the
product due to lightning and power-line surges.
ANTENNA
DISCHARGE
UNIT
15. Power Lines – An outside antenna system
(NEC SECTION
810-20)
ELECTRIC
should not be located in the vicinity of overhead
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
power lines or other electric light or power
GROUND CLAMPS
circuits, or where it can fall into such power lines
POWER SERVICE
GROUNDING ELECTRODE
or circuits. When installing an outside antenna
SYSTEM
(NEC ART 250. PART H)
NEC - NATIONAL ELECTRICAL CODE
system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them might be fatal.
16. Overloading–Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.
17. Objects and Liquid Entry – Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short out parts that could result in a fire or electric
shock. Be careful not to spill liquid of any kind onto the product.
18. Servicing – Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service – Disconnect this product from the wall outlet and all power sources
including battery, and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If any liquid has been spilled onto, or objects have fallen into, the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally even if you follow the operating instructions. Adjust only
those controls that are covered by the operation instructions. Improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance. This indicates a need for service.
20. Replacement Parts – When replacement parts are required, be sure the service technician has used
replacement parts that are specified by Canon or that have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21. Safety Check – Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks to determine that the product is in safe operating order.
ANTENNA
LEAD IN
WIRE
ANTENNA
LEAD IN
WIRE

Advertisement

Table of Contents

   Related Manuals for Canon Optura 100MC

   Summary of Contents for Canon Optura 100MC

  • Page 1 20. Replacement Parts – When replacement parts are required, be sure the service technician has used pinched by items placed upon or against them. Pay particular attention to plugs and the point from replacement parts that are specified by Canon or that have the same characteristics as the original which the cords exit the product.
  • Page 2 Muchas gracias por su compara del juego de adaptador de carga/cable para Grazie per aver acquistato il kit adattatore di ricarica/cavo batteria auto CR-560. Connect it to a car cigarette lighter socket to power a Canon product voiture Canon CR-560.

This manual is also suitable for:

Zr25mc - digital camcorder with built-in still modeZr30mcCg-560

Comments to this Manuals

Symbols: 0
Latest comments: