Canon OPTURA 100 MC NTSC Instruction Manual page 38

0a
.-.g
e-
rr
1. Turn the POWER switch and the TAPE/CARD switch to the
desired settings.
2. Press the MENU button to open the menu.
• One of the main menus appears, according to the settings of the
TAPE/CARD switch and the POWER switch.
3. Turn the selector dial and move the arrow to the desired submenu.
4. Press the selector dial in to select.
, The submenu appears.
5. Turn the selector dial and move the arrow to the desired function.
6. Press the selector dial in to select.
• The function and its settings only appear
7. Turn tile selector dial and move tile arrow to tile desired
setting.
• if you are setting a function other than the white balance or shutter speed,
the function will be set if you skip to step 11.
8. Press the selector dial in to select.
• The function is set and you return to the submenu,
9. Turn the selector dial and move the arrow to _ RETURN.
10.Press the selector dial in to select.
, You return to the main menu.
ll.Press the MENU button.
, The main menu disappears.
38
[] Notes:
, Pressing the MENU button at any time closes the menu.
, Selecting _ RETURN takes you back one menu, or closes the main menu.
, hems that are unawdlable, due to the tape or card situation or the settings of
other menu items, appear in purple.
, You may often find it convenient to use the wireless controller to move around
the menus. Press its MENU button to open/close the menu and use the arrow
keys in place of turning the selector dial. Push the SET button to select.