Canon OPTURA 100 MC NTSC Instruction Manual page 108

0_
O
o
E
0_
"5
® Card Jump Function
You can jump from the current hnage to the deshed image of unadjacent image
number without displaying the images one by one.
The numbel_ shown in the upper right in CARD PLAY (VCR) mode indicate the image
number of the currant still image / total number of still images on the memo U card.
+
With an image in the display, press and hold the CARD +/- button.
, Press the + button to jump through the hnages forwards and press the - button
to jump backwards.
• The image number moves forwards or backwards.
• When you release the button, the still image, to which the currently shown
number is assigned, appears in the display.
® Slide Show
With an image in the display, press the SLIDE SHOW button.
" The images are played back one after another
To stop the slide show, press the SLIDE SHOW button.
• The slide show- starts or stops each time you press the SLIDE SHOW button.
® index Screen
Up to 6 images appear at once so you can search
quickly for an image.
+
1. With an image in the display, press the
INDEX SCREEN button.
• Up to 6 images appear in the display.
2. Move the C_ mark to the
image
you want to view.
• Turn the selector dial downwards to go to the previous image and upwards
to go to the next image.
• Turning the dial upwards at the last hnage will take you to the next index
screen. Turning the dial downwards at the first image will take you to the
previous index screen.
, Jump to the next/previous index screen with the CARD +1- buttons.
3. Press the INDEX SCREEN button.
• The image you have marked fills the whole display.
108