Canon OPTURA 100 MC NTSC Instruction Manual page 69

This is useful when you want to include yourself in the picture when recording
movies or still
photographs.
+ +
1. Press the © self-timer button on the body of the camcorder
or
the SELF TIMER button on the wireless controller.
" SELF-T appears in the display.
, To have the subject monitor recording, rotate the LCD panel 180 ° (_127).
[Formovies ]
2. Press tile start/stop button.
• The camcorder starts to record after it 10-second countdown period (or after
2 seconds when you use the wireless controller). The time remaining counts
down in the display (e.g. "5 SEC").
• SELF-T disappears fiom the display when recording begins.
, The tally lamp starts flashing.
3. Press tile start/stop button to end recording.
[ For stills ]
2. Press a PHOTO button on the eameorder body or the wireless
controller.
• The camcorder automatically adjusts the focus 2 seconds before the
countdown is complete. The O mark flashes white then turns green after the
focus and exposure are set. [f you are using the wireless controller the O
mark starts flashing immediately after you press the PHOTO button.
, The camcorder takes the picture for approximately 6 seconds (8 seconds in
I-'-ISPor I---ILP recording mode).
, [f you're in TAPE CAMERA mode, the camcorder returns to record pause
mode after recording to a tape. [f you're in CARD CAMERA mode, the
currently recording image appears after recording onto a memory cltrd.
_oc
o_
m
_0
69