Liability Statement; Regulatory Compliance - DataCard ImageCard Select User Manual

ii
Please note and heed the WARNING and CAUTION labels that have been placed on
the equipment for your safety. Please do not attempt to operate or repair this
equipment without adequate training.

Liability statement

This Datacard® product has been built to the high standards of Datacard Corporation.
See "Safety and compliance" on page A-1 for the statement of liability.

Regulatory compliance

This Datacard product conforms to regulatory requirements as specified in North
America and Europe. See "Safety and compliance" on page A-1 for detailed
regulatory compliance information.
Trademark acknowledgments
Trademark, service mark, and copyright acknowledgments are listed in "Safety and
compliance" on page A-1.
Proprietary Notice
All drawings and information herein are the property of Datacard Corporation.
Copyright © 2001 Datacard Corporation. All rights reserved.
Revision Log: User's Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Revision Date
A Feb. 2001
B Aug. 2001
Datacard
11111 Bren Road West
Minnetonka, MN 55343-9015
www.datacard.com
952.933.0333
Fax: 952.935.2314
© 1997-2001 Datacard Corporation. All rights reserved. Printed in the United States of America.
Affected Pages
All
1-1, 1-3 to 1-5, 1-7, 1-11, 2-5 to 2-9, 2-
11, 2-14, 3-2, 3-4 to 3-8, 3-10 to 3-12, 4-
2, 4-8 to 4-15, 4-17, 4-37, 5-4, 5-12,
5-15, 6-4, 6-5, 7-2, 7-5 to 7-7, 7-11,
7-13, 7-14, A-1, A-2, B-2, B-7, B-9,
B-12, B-13, C-6, E-2
User's Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Description of Changes
Initial release
Add information for directly networked
printer, optional locking card cartridge,
modified spring bar on swing arm, and
updated driver installation.