DataCard ImageCard Select User Manual page 14

1-8
Back of the printer
Figure 1-5 shows the back of the Select Class printer:
If the printer includes an optional simplex smart card module or duplex module, that
module extends farther than the ports and receptacles.
Find the following on the back of the printer:
Data Port
The printer includes two data ports. Select only one data port to use.
•
•
Power switch
Use the Power switch to power on or power off the printer.
Power receptacle
This is the receptacle for connecting the power cable.
Figure 1-5: The back of the Select printer
ECP parallel port
Use the ECP parallel port to connect the printer's data cable to the PC, if the
printer was ordered with a parallel cable.
USB port
Use the USB port to connect the printer's data cable to the PC, if the printer was
ordered with a USB cable.
User's Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Overview
Data port
ECP parallel port
USB port
Contactless smart card port
Contact smart card port
Power switch
Power receptacle