DataCard ImageCard Select User Manual page 70

5-12
What you see
The printed card shows
wavy lines along the
length of the card
(woodgrain).
The card shows irregular
lighter or darker spots.
The card shows wrinkles
in dark areas of printing.
Part or all of the printed
image is expanded.
#
Table 5-1: Print quality problems
Obtain guidance from service before performing this task.
User's Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Possible causes
The print ribbon is not
loaded correctly.
The printhead is not
aligned correctly.
The printhead is not
aligned correctly.
The printhead intensity is
too high.
The printhead is not
aligned correctly.
The printhead is not
installed properly.
Troubleshooting
Solutions
Load the print ribbon
again. Make sure the
cartridge is firmly seated.
See Chapter 2.
Contact your service
representative.
Contact your service
representative.
Decrease the printhead
intensity setting.
#
See the e-Guide .
Contact your service
representative.
Remove and reinstall the
printhead cartridge. See
Chapter 4.