DataCard ImageCard Select User Manual page 88

7-8
E
Select the procedure that applies to the operating system and type of port you use.
Install the printer driver to a parallel port
1
2
3
4
ROM, or through the e-Guide icon on the desktop) for information on these
installation alternatives.
You can also directly connect the printer to a network using the SmartDriver Direct
Network Kit. See the Direct Network Guide for more information.
Operating Parallel
system
Windows ME "Install the printer driver to a
parallel port" on page 7-8
Windows 98 "Install the printer driver to a
SE parallel port" on page 7-8
Windows NT "Install the printer driver to a
parallel port" on page 7-8
Windows "Install the printer driver to a
2000 parallel port" on page 7-8
Close all applications. Do not close Windows.
Make sure the printer is connected to the PC.
Make sure the printer is powered on.
E
For Windows NT and Windows 2000, log in as the Administrator when you
install the printer driver.
With Windows running, insert the CD-ROM in the PC's drive. The installation
program starts automatically.
E
If the installation program does not start, make sure the CD-ROM is installed
correctly.
– If you are using diskettes, extract files to the PC's hard drive. The installation
program starts automatically.
User's Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Install the printer
USB
"Install the printer driver to a
USB port on Windows Me or
98" on page 7-11
"Install the printer driver to a
USB port on Windows Me or
98" on page 7-11
Not supported by the
operating system.
"Install the printer driver to a
USB port on Windows
2000" on page 7-12