Configuring The Power Button - EUROCOM M375C MILANO User Manual

Configuring the Power Button

The power button may be set to send the computer in to either Standby or Hi-
bernate mode (Figure 3 -
green. In Hibernate mode the LED will be off. If you are in a power saving
mode set to save power through individual components (e.g. hard disk, mon-
itor), the LED will remain green.
Power Button
You may also configure the Sleep/Resume key combination (Fn + Esc) from the
menu illustrated in Figure 3 -
16). In Standby mode, the LED
Lid Sleep/Resume
Sleep Button
16. In Windows this is referred to as the Sleep button.
Advanced Controls
will flash
If you have set your
computer
Standby mode when
the lid ("when I close
the lid of my portable
computer:")
computer
(the
switch acts as a sen-
sor to tell when the lid/
LCD panel is closed),
the system will not re-
sume normal operation
when the lid is opened.
Press a key on the
(Sleep) Button
keyboard to resume
operation.
Power Options
(Advanced - Power
Intel CPU SpeedStep Controls 3 - 27
Close Cover
to enter
of the
is closed
close cover
Figure 3 - 16
Buttons)
3