Configuring The Power Button - EUROCOM Notebook User Manual

Power Management
3
Figure 3 - 3
Power Options
(Advanced - Power
Buttons)

3 - 8 Configuring the Power Button

Configuring the Power Button
The power button may be set to send the computer in to either Standby or Hi-
bernate mode (Figure 3 -
In Hibernate mode the LED will be off. If you are in a power saving mode
set to save power through individual components (e.g. hard disk, monitor), the
LED will remain green.
Power Button
You may also configure the Sleep/Resume key combination (Fn + F4) from the
menu illustrated in Figure 3 -
3). In Standby mode, the LED
Lid Sleep/Resume
Sleep Button
3. In Windows this is referred to as the Sleep button.
will flash green.
(Sleep) Button