Table of Contents
Advertisement
Introduction
1
2 * USB 2.0 Ports
These USB 2.0 compatible ports (USB 2.0 is fully USB 1.1 compliant) are for
low-speed peripherals such as keyboards, mice or scanners, and for high-
speed peripherals such as external HDDs, digital video cameras or high-speed
scanners etc. Devices can be plugged into the computer, and unplugged from
the computer, without the need to turn the system off (if the power rating of
your USB device is 500mA or above, make sure you use the power supply
which comes with the device). See Windows Service Pack information on
page
4 -
3.
Mini-IEEE 1394 Port
This allows high-speed connection to various peripheral devices, e.g. external
disk drives and digital cameras (see note below).
IEEE 1394
The Mini-IEEE 1394 port only supports SELF POWERED IEEE 1394 devices.
PC Card Slot
The 3.3V/5V slot may be used for a Type-II PC card (PC cards were also pre-
viously referred to as PCMCIA) and fully supports Cardbus. Refer to
"PC
Card Slot" on page 2 - 15
for more information.
Left Side View 1 - 13
Advertisement
Table of Contents
Need help?
Do you have a question about the M375C MILANO and is the answer not in the manual?
Questions and answers