Basic Hints And Tips - EUROCOM M375C MILANO User Manual

Troubleshooting

Basic Hints and Tips

Many of the following may seem obvious but they are often the solution to a problem when your computer
appears not to be working.
• Power - Is the computer actually plugged into a working electrical outlet? If plugged into a
power strip, make sure it is actually working. Check the LED Power Indicators (see
Power & Communication Indicators" on page 2 -
• Connections - Check all the cables to make sure that there are no loose connections anywhere.
• Power Savings - Make sure that the system is not in Hibernate or Standby mode by pressing the
keys configured in your Power Management/Power Options (see
sor Performance" on page 3 -
system.
8
• Brightness - Check the brightness of the screen by pressing the Fn + F9 and F10 keys to adjust
the brightness (see
• Display Choice - Press Fn + F6 to make sure the system is not set to "external only" display (see
"Switching/Enabling Displays (Keyboard)" on page 3 -
• Boot Drive - Make sure there are no floppy disks in the drive (if you have one connected) when
you start up your machine (this is a common cause of the message "Invalid system disk - Replace
the disk, and then press any key" / "Remove disks or other media. Press any key to restart").
8 - 2 Basic Hints and Tips
20), or by pressing the Fn + Esc key combination, to wake-up the
"Advanced Video Controls" on page 3 -
6) to see the computer's power status.
"Power Schemes and Proces-
2).
9).
"LED