Table of Contents
Advertisement
Advanced Controls
3
Figure 3 - 11
TV Video Standard
3 - 16 Display Devices
TV System
If you are using a TV as a display device you may change the video standard
to NTSC or PAL as follows:
1.
Plug the TV into the appropriate port.
2.
Go to the Intel(R) 82852/82855 Graphics Controller Properties control
panel (see
"Intel Video Driver Controls" on page 3 -
Devices (tab).
3.
Choose the display mode (Television, Clone or Extended Desktop) and
set the device to be Primary or Secondary if required.
4.
Adjust the settings by clicking the Device Settings (button).
5.
Choose the appropriate TV system from Video Standard dropbox.
6) and select
Advertisement
Table of Contents
Need help?
Do you have a question about the M375C MILANO and is the answer not in the manual?
Questions and answers