Table of Contents
Advertisement
BIOS Utilities
Failing the POST
Errors can be detected during the POST. There are two categories, "fatal" and
"non-fatal".
Fatal Errors
These stop the boot process and usually indicate there is something seriously
wrong with your system. Take the computer to your service representative or
5
authorized service center as soon as possible.
Non-Fatal Errors
This kind of error still allows you to boot. You will get a message identifying
the problem (make a note of this message!) followed by the prompt:
• Press <F1> to resume
• <Ctrl-Alt-S> to enter System Configuration Utility
Press F1 to see if the boot process can continue. It may work, without the cor-
rect configuration.
Press Ctrl-Alt-S simultaneously to run the SCU program and try to correct the
problem. If you still get an error message after you change the setting, or if the
"cure" seems even worse, call for help.
The Power-On Self Test (POST) 5 - 3
Advertisement
Table of Contents
Need help?
Do you have a question about the M375C MILANO and is the answer not in the manual?
Questions and answers