Windows 2000 Professional; New Hardware Found - EUROCOM M375C MILANO User Manual

Windows 2000 Professional

This section covers driver and utility installation in-
structions for Windows 2000 Professional.

New Hardware Found

If you see the message "New Hardware Found"
(Found New Hardware Wizard) during the
installation procedure (other than when outlined in
the driver install procedure), click Cancel to close
the window, and follow the installation procedure
as directed.
Windows 2000 Service Pack 4
Make sure you install Windows 2000 Service Pack
4 (or a version of Windows 2000 which includes
SP4) before installing any drivers. Service Pack 4
includes support for USB 2.0.
If you have upgraded the system by installing Ser-
vice Pack 4 (i.e. your Windows 2000 version does
not include Service Pack 4) then follow these in-
structions:
1.Go to Device Manager (see step 1 of the PC Card
driver installation instructions on page
click "+" next to Other Devices (if its sub-items are
not shown).
2.Right-click Universal Serial Bus (USB) control-
ler and click Uninstall > OK.
3.Restart the computer and it will find the USB 2.0
Root Hub.
Windows 2000 Professional 4 - 7
Drivers & Utilities
4 - 9) and
4