Configuring The Power Button - EUROCOM Notebook User Manual

Configuring the Power Button

The power button may be set to send the computer in to either Standby or Hi-
bernate mode. In Standby mode, the LED
mode the LED will be Off (battery powered)/Orange (AC Adapter powered).
In a power saving mode set to save power through individual components (e.g.
hard disk, monitor), the LED will remain green.
Power Button
You may also configure the Sleep/Resume key combination (Fn + F4) from the
menu illustrated in Figure 3 -
will flash green. In Hibernate
Lid Sleep/Resume
Sleep Button
14. In Windows this is referred to as the Sleep button.
Advanced Controls
Lid Button
It is recommended that
you set the lid (left
LCD cover sensor)
power button to "Do
nothing".
This will prevent acci-
dentally triggering a
power saving mode
when you rotate the
LCD swivel screen.
(Sleep) Button
Figure 3 - 14
Power Options
(Advanced - Power
Conserving Power (System) 3 - 23
Buttons)
3