Table of Contents
Advertisement
To Enable Dual Display Multi:
1.
Plug the VGA monitor and TV into the appropriate port (you will need to
have three display devices attached for this display mode).
2.
Enable Extended Desktop Mode (see
Mode:" on page 3 -
13).
3.
Click the Enable Twin Configuration checkbox.
4.
Choose which device is to be the Primary display, and which is to be
Secondary (this will affect which devices can be the Source and
Destination).
5.
Adjust the settings by clicking the Device Settings (button) if necessary.
6.
Click Apply > OK and close the control panels.
"To Enable Extended Desktop
Advanced Controls
Figure 3 - 10
Device Settings
(Dual Display Multi
Mode)
Display Devices 3 - 15
3
Advertisement
Table of Contents
Need help?
Do you have a question about the M375C MILANO and is the answer not in the manual?
Questions and answers