EUROCOM M375C MILANO User Manual page 72

Advanced Controls
3
Figure 3 - 7
Device Settings
(Clone Mode)
3 - 12 Display Devices
To Enable Dual Display Clone Mode:
1. Plug the VGA monitor or TV into the appropriate port.
2. Go to the Intel(R) 82852/82855 Graphics Controller Properties control
panel (see "Intel Video Driver Controls" on page 3 -
Devices (tab).
3. Click the Intel(R) Dual Display Clone icon in the devices tab (Note: this
option is only available when you have attached a monitor or TV).
4. Choose which device is to be the Primary display, and which is to be
Secondary.
5. Adjust the settings by clicking the Device Settings (button) if necessary.
6. Click Apply > OK and close the control panels.
6) and select