Configuring The Power Button - EUROCOM Notebook User Manual

Configuring the Power Button

The power button may be set to send the computer in to either Stand by or Hibernate mode. In Stand by mode,
the LED will blink green. In Hibernate mode the LED will be off (battery). If you are in a power saving
mode set to save power through individual components (e.g. hard disk, monitor), the LED will remain green.
Sleep Button
You may also configure
the Sleep/Resume key
combination (Fn + F4).
In Windows this is re-
ferred to as the Sleep
button.
Power Button
Figure D - 12
- Power Options (Advanced - Power Buttons)
Windows XP Information
Lid
Configuring the Power Button D - 19
Sleep/Resume
(Sleep) Button
D