The Power-On Self Test (Post) - EUROCOM M375C MILANO User Manual

BIOS Utilities
The POST Screen
1. BIOS information
2. CPU type
3. Memory status
4. Enter SCU prompt
5
appears only during
POST
Note: The POST screen
as pictured above is for
guideline purposes only.
The POST screen on
your computer may ap-
pear slightly different. If
you choose the Fast
Boot option you will see
an abbreviated version
of this screen.
Figure 5 - 1
POST Screen

5 - 2 The Power-On Self Test (POST)

The Power-On Self Test (POST)
Each time you turn on the computer, the system takes a few seconds to con-
duct a POST, including a quick test of the on-board RAM. As the POST pro-
ceeds, the computer will tell you if there is anything wrong. If there is a
problem which prevents the system from booting, it will display a system
summary and prompt you to run SCU.
If there are no problems, the SCU (System Configuration Utility) prompt
will disappear and the system will load the operating system. Once that starts,
you can't get into the SCU without rebooting the computer.
Insyde Software MobilePro BIOS Version 1.01
Copyright 1983 - 2002 Insyde Software Corp. All Rights Reserved
H8 VERSION 04.15.03
1400MHz Pentium M with MMX CPU
CPU Microcode Update Rev 011h Complete
L2 Cache: 512K installed
8MB Video RAM
Insyde Software Plug-n-Play BIOS Ver 1.17.01
Base Memory
Extended Memory
Total Memory
Shared Memory
Auto Detecting IDE Devices[Done]
Ctrl-Alt-S to Enter System Configuration Utility
1
2
0000640 KB
3
0252928 KB
0253952 KB
008192 KB
4