Configuring The Power Button - EUROCOM M590K User Manual

Power Management
3
Figure 3 - 3
Power Options
(Advanced - Power
Buttons)

3 - 8 Configuring the Power Button

Configuring the Power Button
The power button may be set to send the computer in to either Stand by or Hiber-
nate mode. In Stand by mode, the LED
the LED will be off. If you are in a power saving mode set to save power through
individual components (e.g. hard disk, monitor), the LED will remain green.
Power Button
You may also configure the Sleep/Resume key combination (Fn + F4) from the menu illus-
trated in Figure 3 - 3. In Windows this is referred to as the Sleep button.
will blink green. In Hibernate mode
Lid Sleep/Resume
Sleep Button
(Sleep) Button