Bluetooth Module; Bluetooth Driver Installation (Win2000) - EUROCOM M375C MILANO User Manual

Bluetooth Module

Before installing the Bluetooth driver, make sure that the optional Bluetooth
module is on (the LED will be green). Use the Module ON/OFF Button
(see "Module ON/OFF Button" on page 1 -
tooth module (if the Found New Hardware Wizard appears, click Cancel).
Make sure you install the drivers in the order indicated in
stall Procedure' on page

Bluetooth Driver Installation (Win2000)

1. Insert the Bluetooth CD-ROM into the CD drive.
2. The program will run automatically.
3. If the Found New Hardware Wizard appears, click Cancel, and click OK
if you see Unsafe Removal of Device.
4. Click Start (menu) > Run ...
5. Navigate (Browse...) to the top level of the CD D:\ and click OK.
6. Click Install Drivers and Application Software and click Next.
7. Click the button to accept the license agreement, then click Next.
8. Click Next > Install (click OK if asked if you want to continue).
9. Click Finish > Yes to restart the computer.
10. You can configure the settings in the Bluetooth Configuration control
panel (Start menu and point to Settings and click Control Panel then
double-click the Bluetooth Configuration icon).
The Bluetooth Manual (in .html format) is on the Bluetooth CD-ROM in the
Userguide folder (insert the Bluetooth CD-ROM and click Browse this CD).
10) to toggle power to the Blue-
4-6.
Wireless & PC Camera Modules
Wireless Device
Operation Aboard
The use of any porta-
Table 4 - 1 - In-
ble electronic trans-
mission
aboard aircraft is usu-
ally prohibited. Make
sure the module(s) are
OFF if you are using
the computer aboard
aircraft.
computer 'Boots Up'
the modules will be
ON.
Bluetooth Module 7 - 7
Aircraft
devices
7
When your