Table of Contents
Advertisement
To Enable Extended Desktop Mode:
1.
Plug the VGA monitor or TV into the appropriate port.
2.
Go to the Intel(R) 82852/82855 Graphics Controller Properties control
panel (see
"Intel Video Driver Controls" on page 3 -
Devices (tab).
3.
Click the Extended Desktop icon in the devices tab (Note: this option is
only available when you have attached a monitor or TV).
4.
Choose which device is to be the Primary display, and which is to be
Secondary.
5.
Adjust the settings by clicking the Device Settings (button) if necessary.
6.
Click Apply > OK and close the control panels.
You can also enable the Extended Desktop mode from the Display Properties
control panel (see
"Display Properties" on page 3 -
6) and select
5).
Advanced Controls
Device Settings
Extended Desktop
You can have different
Colors, Screen Area
and Monitor Refresh
Rates for each display
device provided your
monitor can support
them.
You can drag the mon-
itor icons to match the
physical layout of your
displays.
Icons
and
programs may also be
dragged between the
displays.
Figure 3 - 8
Device Settings
(Extended Desktop
Mode)
Display Devices 3 - 13
3
Advertisement
Table of Contents
Need help?
Do you have a question about the M375C MILANO and is the answer not in the manual?
Questions and answers