Audio - EUROCOM 888E DREAM MACHINE User Manual

Audio

Problem
The Audio "DJ" CD The computer is turned ON
Player will not turn (see
on (nothing appears Player" on page 3 -
on the LCD of the
player).
The sound cannot The volume might be set too
be heard or the low. (How high the sound
volume is very low. volume can be set using the
volume control knob depends
on the setting of the volume
control within Windows. Click
the Speaker icon on the
taskbar to check the setting.)
The line-in cannot be The TV Tuner is installed, and
used. the TV Studio software is not
running.
Possible Cause
Check your computer is not turned on (or running in a
"Audio "DJ" CD power saving mode), and if it is then shut it down, then
26). toggle the ON/OFF switch on the CD Player.
Check the volume control in the Sound Control Panel
in the Windows Toolbar.
The headphone is plugged into the wrong jack. It
should be plugged into the Line-In Jack (see
Jack" on page 1 -
Check the volume control settings on the Audio "DJ"
player. The Volume controls on the Audio DJ player
still control the volume settings if the computer's
operating system is running.
Make sure you run the TV Studio software when you
want to use the line-in and have the optional TV Tuner
installed (see
page 6 -
Possible Solution
15).
"Line-In Function with TV Tuner" on
8).
Troubleshooting
"Line-In
Audio 8 - 17
8