EUROCOM 888E DREAM MACHINE User Manual page 220

Problem
The system does not No power saving options are
go into suspend or enabled.
save to disk when
the battery is low.
The infrared device The drivers (if supplied with
doesn't work. the device) are not loaded.
The FIR settings are not
configured correctly.
The infrared transceiver is
blocked.
Possible Cause
Use one of the Power Options presets.
Please read the documentation which comes with any
new external device, and make sure you install the
driver (if one is required) for it as this will allow you
to access any extra functions which come with your
device.
See
page 3 -
You may need to change the settings for the infrared
device in the BIOS (see
page 5 -
Make sure nothing is between your system's infrared
transceiver and the destination's transceiver. The
infrared transceivers operate on a "Line of Sight".
Possible Solution
"Configuring the Infrared Settings for FIR" on
32.
"Components Menu" on
16) to enable the FIR setting support.
Troubleshooting
Operation 8 - 25
8