1. Manuals
  2. Brands
  3. EUROCOM Manuals
  4. Laptop
  5. 8500-V Super Notebook
  6. User manual

EUROCOM 8500-V Super Notebook User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Notice
The company reserves the right to make any updates, revisions or changes to the
information contained herein as and when deemed necessary. The company is
under no obligation to notify any purchaser or end-user of such actions in advance
or afterwards.
2000
Trademarks
IBM PC, OS/2, PS/2, EGA, and VGA are registered trademarks of International Busi-
ness Machines Corporation.
Intel, Pentium are trademarks of Intel Corporation.
MS-DOS, Microsoft Windows, Windows NT and Microsoft Mouse are registered
trademarks of Microsoft Corporation.
Sound Blaster Pro is a trademark of Creative Labs, Inc.
SystemSoft is a registered trademark of SystemSoft Corp.
Other brand and product names are trademarks of their respective companies.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8500-V Super Notebook and is the answer not in the manual?

Questions and answers

Related Manuals for EUROCOM 8500-V Super Notebook

Summary of Contents for EUROCOM 8500-V Super Notebook

  • Page 1 Notice The company reserves the right to make any updates, revisions or changes to the information contained herein as and when deemed necessary. The company is under no obligation to notify any purchaser or end-user of such actions in advance or afterwards.
  • Page 2 Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 3: Safety Instructions

    Safety Instructions As with any other piece of precision electronic equipment, proper care and operation of your notebook computer will prolong its use. Help your notebook computer last longer by following this advice: Handling the Computer Do not expose it to excessive heat Do not expose your notebook or direct sunlight.
  • Page 4 Do not place the computer on an Do not place the computer on any unstable surface. surface which will block the vents. Don’t use or store the computer in Do not disassemble the computer a humid environment. by yourself. Do not turn off any peripheral de- Do not turn off the power until you vices when the computer power is properly shutdown all programs.
  • Page 5 Do not place anything heavy on When traveling by air, follow the the computer. airline’s instructions for in-flight use. If there is an unusual odor, heat or Perform routine maintenance on smoke coming from your com- your computer. puter, unplug the cord.
  • Page 6 Handling of the Power Cord & Battery Do not plug in the power cord if Do not use the power cord if it is you are wet. broken. Do not place heavy objects on the Do not touch the battery contacts power cord.
  • Page 7 Handling Peripheral Devices Use only approved brands of pe- Unplug the power cord before at- ripheral devices. taching any peripheral devices. Other reminders Do not touch the poisonous liq- Do not throw the computer or ac- uid if the LCD panel breaks. cessories into a fire.
  • Page 8 Developing Good Work Habits Developing good work habits are important if you need to work in front of the computer for long periods of time. Improper work habits can result in discom- fort or serious injury from repetitive strain to your hands, wrists or other joints. The following are some tips to reduce the strain: Adjust the height of the chair and/or desk so that the keyboard is at or slightly below the level of your elbow.
  • Page 9 Remember to: Alter your posture frequently. Stretch and exercise your body several times a day. Take periodic breaks when you work at the computer for long periods of time. Frequent and short breaks are better than fewer and longer breaks. Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders.

  • Page 10: Table Of Contents

    Table of Contents Chapter 1. Getting Started ..........1-1 Checking the Items ............... 1-3 Opening the LCD Display ............. 1-3 Top View with Display Open ..........1-5 LCD Display ................1-5 Power Button ................1-5 Stereo Speakers ................. 1-5 Touchpad and Buttons ..............1-5 Keyboard ..................
  • Page 11 CD-ROM Drive ................1-12 Chapter 2. Using the Computer ......... 2-1 The Power Sources .............. 2-3 AC Power Adapter ..............2-3 Battery Pack ................2-3 Turning on the Computer ............2-5 LED Indicators ................2-5 The Hard Disk Drive (HDD) ..........2-7 Removing the HDD ..............
  • Page 12 Upgrading the Memory ............4-5 Installing a Memory Module ............4-7 Removing a Memory Module ............4-9 Adding or Replacing the Processor ........4-9 Chapter 5. BIOS Utilities ............. 5-1 Power on Self Test (POST) ..........5-3 POST Message: Normal Operation ..........5-3 POST Message: Error Detected ..........
  • Page 13 Step 1: Installing the VGA Driver(ATI) ........6-12 Step 2: Installing the Audio Driver ..........6-12 Step 3: Installing the Touchpad Driver ........6-13 Step 4: Installing the Modem Driver ........... 6-14 Step 5: Installing the LAN Driver ..........6-15 Step 6: Installing the DVD driver (optional) ........

  • Page 14: Checking The Items

    Chapter 1. Getting Started Chapter 1. Getting Started This chapter provides you with the basic introduction about the computer and its features. Now, lets take a look at the computer from the different view. Checking the Items Opening the LCD Display Top View with Display Open Right Side View Rear View...

  • Page 15: Checking The Items

    User’s Manual Checking the Items Carefully remove everything from the shipping box and check the items one by one. If any item is missing or damaged, contact your dealer immediately. User’s Manual Notebook Computer PS/2 Transfer Cable Carrying Bag Utilities Diskette(s) Power Adapter Battery Pack Power Cord...

  • Page 16: Opening The Lcd Display

    Chapter 1. Getting Started Opening the LCD Display 1) Move the cover latch to the right to release the top cover (!). 2) Lift the top cover to reveal the LCD panel and keyboard ("). 3) Adjust the LCD panel to a comfortable viewing angle. 4) Press the power button to power up the system.

  • Page 17: Top View With Display Open

    User’s Manual Top View with Display Open LCD Display The Notebook has a LCD (Liquid Crystal Display) panel. Depending upon the model you have purchased, the display screen can be a 15.0" XGA or SXGA TFT color panel. The LCD panel is driven by a AGP bus video controller with 8 or 16 MB video memory.

  • Page 18: Led Indicators

    Chapter 1. Getting Started LED Indicators These LED indicators display the system's operational status. Refer to Chapter 2 LED Indicators for more information. Microphone With the built-in microphone you can record on your notebook computer. Microphone Stereo Speakers LCD Display Power Button LED Indicators Keyboard...

  • Page 19: Right Side View

    User’s Manual Right Side View Phone Jack The RJ-11 phone jack is used to support a built-in 56K MDC modem. For more information on the phone jack please refer to Chapter 3 “Attaching Peripherals”. Hard Disk Drive The computer accepts any 2.5” hard disk drive with 9.5mm/12.7mm/ 17.0mm height.

  • Page 20: Speaker-Out Jack

    Chapter 1. Getting Started Speaker-out Jack Headphone and speakers can be attached to the system through this jack. Audio Line-in Jack An external audio source can be connected to the computer through this jack. Microphone Jack This jack is used to connect an external microphone. Besides, the jack also provides a S/P-DIF (Sony/Philips Digital Interface Format) output, which allows you to connect your DVD-capable PC to a Dolby AC-3 compatible receiver.
  • Page 21 User’s Manual Audio Line-in Jack Phone (RJ-11) Jack Speaker-out Jack PC Card Slot Microphone Jack Floppy Disk Drive Right Side Stand Hard Disk Drive Vent Pull down the stand when operating your computer.

  • Page 22: Rear View

    Chapter 1. Getting Started Rear View Power Jack Plug the AC adapter into this jack for power supply. To disconnect, pull the adapter away from the jack. Locking Device Connector A lock for your computer can be attached to this slot to prevent possible theft.

  • Page 23: S-Video Jack

    User’s Manual S-video Jack Use this jack to transmit a video signal to a TV set. RCA Jack This jack allows the computer to receive analog composite signals from external video devices, e.g. camera, CD. Dual USB Ports The dual Universal Serial Bus (USB) ports make adding peripheral devices easy.

  • Page 24: Rca Jack

    Chapter 1. Getting Started Power Jack PS/2 Port Port Replicator Locking Device Connector LAN Port Open the back cover to reveal the ports as shown below. S-Video Jack Dual USB Ports External Monitor Port RCA Jack Serial Port Parallel Port 1394 Port 1-11...

  • Page 25: Left Side View

    User’s Manual Left Side View Left Side Stand Position the stand (along with the right one) to adjust the angle of the computer. If a high speed CPU is installed in the computer, erect the stands on both sides to help heat dissipation during operation. Infrared Port This port allows communication with an infrared-compatible device.

  • Page 26: Chapter 2. Using The Computer

    Chapter 2. Using the Computer Chapter 2. Using the Computer Your notebook computer can be used almost anywhere, in the home, office, or on the road. To learn more about how to operate your computer, the features available and how to power your computer please read this chapter. The Power Sources Turning on the Computer The Hard Disk Drive...

  • Page 27: The Power Sources

    User’s Manual The Power Sources The computer can be powered by either an AC adapter or a battery pack de- pending on where you want to use it. AC Power Adapter Use only the power adapter that comes with your computer. An incorrect type of power adapter will damage the computer and its components.

  • Page 28: Battery Pack

    Chapter 2. Using the Computer Battery Pack The battery pack allows you to use your notebook computer when you are on the road or an electrical outlet is unavailable. Battery life differs depending on the applications and the configuration you're using. Inserting the Battery Pack 1) Turn the computer over.

  • Page 29: Recharging By Ac Power

    User’s Manual Recharging by AC Power The battery pack will automatically recharge when it is in its bay in the com- puter and the computer is plugged into an AC power supply. While the battery is recharging, you can still use the computer. It will take several hours to fully recharge the battery and slightly longer if you are using the computer while the battery is recharging.

  • Page 30: Turning On The Computer

    Chapter 2. Using the Computer Turning on the Computer Now you are ready to begin using your new notebook computer. To turn it on simply press the power button. Power Button Note: After turning off the computer, wait for a few seconds before you turn it on again.
  • Page 31 User’s Manual Icon Color Description Green Battery supplies power to the computer. AC power adapter is connected to the computer and supplies ac power to it. Green Battery is fully charged. Battery is being recharged with the AC adapter connected to the computer. Blinking Red Battery power is critically low.

  • Page 32: The Hard Disk Drive (Hdd)

    Chapter 2. Using the Computer The Hard Disk Drive (HDD) The hard disk drive is used to store your data internally in the notebook com- puter. It is mounted in a removable case and can be taken out to accommodate other 2.5"...

  • Page 33: The Floppy Disk Drive (Fdd)

    User’s Manual The Floppy Disk Drive (FDD) The computer is equipped with a removable 3.5", 3-mode floppy disk drive mod- ule. It is usually designated drive A by default and can be used as a boot device if properly set (refer to Chapter 5, BIOS Utilities). You may replace the floppy disk drive module with a 100/250MB IO MEGA Zip Drive (15mm height) or a 12.7 mm/12.5mm high 2.5"...

  • Page 34: The Cd-Rom

    Chapter 2. Using the Computer The CD-ROM The notebook computer comes standard with a 24X speed removable 5.25" CD- ROM drive. It is usually labeled drive D and may be used as a boot device if properly set (refer to Chatper 5, BIOS Utilities). The removable CD-ROM drive can be replaced with optional drive units, such as DVD-ROM or CD-RW.

  • Page 35: Handling Compact Discs

    User’s Manual Handling Compact Discs Proper handling of your CDs will prevent them from being damaged. Please follow the advices listed below to make sure that the data stored on your CD- ROMs can be accessed. Remember to: - Hold the CD by the edges; do not touch the surface of the disc. - Use a clean, soft, dry cloth to remove dust or fingerprints.

  • Page 36: The Pc Card Slots

    Chapter 2. Using the Computer The PC Card Slots The computer is equipped with two PC card sockets (previously referred to as PCMCIA). Both sockets support two 3.3V/5V type II or one type III PC card or two 3.3V CardBus cards. PC card Slot A is on the top and Slot B is on the bottom.

  • Page 37: Pc Card Problem In Windows 98

    User’s Manual PC Card Problem in Windows 98 After installation of Windows 98 or Windows 98 Second Edition, you probably will find PC cards work abnormally and has one or a few of the following situations: An exclamation mark appears in the PC card driver in Device Manager PC cards don’t work at all PC card controllers are not enumerated...

  • Page 38: The Hot Key

    Chapter 2. Using the Computer The Hot Key Located on the bottom-left of the keyboard is the Fn key or Function key. The Fn key allows you to change operational features instantly (Hot Keys). When you use the following functions, press and hold the Fn key; then press the appropriate function key (F6, F9, F10, etc..) located at the top of your keyboard.

  • Page 39: The Numeric Keypad

    User’s Manual The Numeric Keypad A numeric keypad is integrated into the keyboard for easy numeric data input. To use the keypad simply: • Activate the Num Lock feature (press the Num Lock key). • Press the desired number keys. Note: The keyboard showed here is for American-English version only.

  • Page 40: Chapter 3. Attaching Peripherals

    Chapter 3. Attaching Peripherals Chapter 3. Attaching Peripherals To enhance your computer's capabilities, you can attach peripheral devices to the computer using the ports or jacks located on the rear panel of the computer. The computer can support the following peripheral devices: PS/2 Keyboard or Mouse USB Compatible Device Serial Mouse...

  • Page 41: Ps/2 Keyboard Or Mouse

    User’s Manual PS/2 Keyboard or Mouse The computer can use a PS/2 keyboard or mouse attached by a PS/2 transfer cable that comes with your notebook computer. Attach the external keyboard or mouse to the PS/2 port as shown below. PS/2 Transfer Cable...

  • Page 42: Usb Compatible Device

    Chapter 3. Attaching Peripherals USB Compatible Device The computer has the dual USB ports for connecting one or two USB compat- ible devices such as an USB-compatible keyboard, mouse, or other USB de- vice. Simply plug the device into the USB port as shown below.

  • Page 43: Serial Mouse

    User’s Manual Serial Mouse The serial port features a 9-pin connector. You can connect any serial device such as a mouse to this port. To connect a serial device you must: 1) Turn off the computer. 2) Connect the cable to the serial port on the rear of the computer (!). 3) Tighten the screws that fasten the cable to the serial port (").

  • Page 44: External Monitor (Crt)

    Chapter 3. Attaching Peripherals External Monitor (CRT) The computer can support an XGA compatible external monitor up to 1600x1200x16M resolution. The external monitor can be used simultaneously with the LCD display turned on or off. You can setup your computer to use an external monitor by pressing the Fn + F6 keys (refer to The Hot Key in Chapter To install an external monitor you simply: 1) Turn off the computer.

  • Page 45: Tv Set

    User’s Manual TV Set The S-Video jack on the rear panel of the computer is used for transmitting video signals to a TV set. To add a TV set simply plug the TV set cable into the S-Video jack as shown below. Note: You may need to select the video standard for video display.

  • Page 46: Parallel Printer

    Chapter 3. Attaching Peripherals Parallel Printer You can connect any standard Centronics parallel printer to your computer using the parallel port. To connect a printer simply: 1) Turn off the computer. 2) Connect the cable to the parallel port on the rear of the computer (!). 3) Tighten the screws that fasten the cable to the parallel port (").

  • Page 47: Phone Line

    User’s Manual Phone Line The notebook has a RJ-11 phone jack for connecting to a phone line to proceed modem communications. The notebook comes with a built-in modem, so if you want to use this jack you simply attach a phone cord to the jack.

  • Page 48: Security Lock

    Chapter 3. Attaching Peripherals Security Lock A security lock can be installed on your notebook computer to help prevent theft. To install the security lock, wrap the cable around a desk or other immov- able object, then insert the locking device into the slot located on the left side of your notebook computer.

  • Page 49: Digital Camera

    User’s Manual Digital Camera A digital camera can be connected to the computer through the 1394 port. However, not every type or brand of digital camera can be connected to the computer. Choose the camera that comes with a specially designed plug for 1394 port.

  • Page 50: Video Input Device

    Chapter 3. Attaching Peripherals Video Input Device The RCA jack allows input from various video devices such as VCRs, camcorders and other consumer appliances. Simply attach the device as shown in the picture. 3-11...

  • Page 51: Local Area Network (Lan)

    User’s Manual Local Area Network (LAN) The computer has a LAN port (RJ-45) for connecting to a 100M/10M local area network (LAN). The LAN card is built-in. Simply attach the network cable as shown in the picture. 3-12...

  • Page 52: Chapter 4. Upgrading The Computer

    Chapter 4. Upgrading the Computer Chapter 4. Upgrading the Computer This chpater contains the information about how to upgrade the notebook com- puter or enhance its functions. Please follow the steps to upgrade your com- puter, if you have any troubles or problems, you can contact your dealer for further help.

  • Page 53: Replacing The Hdd

    User’s Manual Replacing the HDD The hard disk drive is contained in a case. Please follow the steps below to replace the drive: 1) Remove the two screws on each side of the case. Note: The location of the two screws may vary depending on the types of hard disk drive.

  • Page 54: Replacing The Fdd

    Chapter 4. Upgrading the Computer Replacing the FDD 1) Turn off the computer. 2) Turn the computer upside down. 3) Press the latch (!) and pull the floppy disk drive out of the computer ("). 4) Insert the replacement drive (100/250MB Zip Drive or secondary HDD) firmly into the computer.

  • Page 55: Replacing The Cd-Rom Module

    User’s Manual Replacing the CD-ROM Module Removing the CD-ROM 1) Turn off the computer. 2) Turn the computer upside down. 3) Press the latch (!) and pull the CD-ROM module out of the computer ("). Inserting the CD-ROM module Refer to Removing the CD-ROM and follow the instructions in a reverse order.

  • Page 56: Upgrading The Memory

    Chapter 4. Upgrading the Computer Upgrading the Memory The computer has two memory sockets for PC-100 or PC-133 compliant, 144 pin SODIMM (Small Outline Dual In-line Memory Module) modules. The memory can be expanded up to 512MB with the following combinations: Total Size Bank 0 Bank 1...

  • Page 57: Installing A Memory Module

    User’s Manual Installing a Memory Module 1) Turn off the computer. 2) Press the two keyboard latches at the top of the keyboard to elevate the key- board from its normal position. 3) Carefully lift the keyboard assembly out to expose the mainboard. 4) Locate the memory banks.
  • Page 58 Chapter 4. Upgrading the Computer Note: The memory socket Bank 1 is a reverse type, make sure you install the memory module with reverse side to fit its connector. Please ensure that each edge of the memory module (SDRAM) has no component mounted on (see below).

  • Page 59: Removing A Memory Module

    User’s Manual Removing a Memory Module 1) Turn off the computer. 2) Press the two keyboard latches to elevate the keyboard from its nor- mal position (refer to page 4-6). 3) Carefully lift the keyboard assembly out to expose the mainboard. 4) Locate the memory sockets.

  • Page 60: Adding Or Replacing The Processor

    Chapter 4. Upgrading the Computer Adding or Replacing the Processor The mainboard can support a Intel® Pentium !!!/Celeron FC-PGA 370 proces- sor. These processors lock into the mainboard. To open and close the CPU lock you will need a special tool which is not supplied with your notebook computer.

  • Page 61: Chapter 5. Bios Utilities

    Chapter 5. BIOS Utilities Chapter 5. BIOS Utilities In this chapter you will learn about the Power On Self Test (POST), power management and how to configure the system parameters using the BIOS Setup Utility. Power On Self Test (POST) BIOS Setup Utility Features of BIOS Setup Utility - Main Menu...

  • Page 62: Power On Self Test (Post)

    User’s Manual Power on Self Test (POST) The system BIOS (Basic Input/Output System) performs a series of tests on the system memory and key computer components every time the computer is powered on. These tests are called the Power On Self Test (POST). Should an error exist, the POST routine may halt execution (depending on the problem).

  • Page 63: Post Message: Error Detected

    Chapter 5. BIOS Utilities POST Message: Error Detected If an error is detected, you will see the following ERROR message. You may press F1 key to continue (resume), or press F2 to enter the BIOS Setup Utility (Setup). PhoenixBIOS 4.0 Release 6.X Copyright 1985-1999 Phoenix Technologies Ltd.

  • Page 64: Bios Setup Utility

    User’s Manual BIOS Setup Utility The BIOS Setup Utility can be used to set your notebook's system parameters. Things like the date and time or what your computer will do are what you set in the BIOS Setup Utility. The settings are stored in a nonvolatile battery-backed CMOS RAM. This means that your settings are saved even when the notebook is turned off.

  • Page 65: Initiating The Bios Setup Utility

    Chapter 5. BIOS Utilities Initiating the BIOS Setup Utility The BIOS Setup Utility can be accessed by pressing the F2 key when you turn on your computer and see this message: Press <F2> to enter SETUP This message lasts only a few seconds and if you don’t respond in time, the computer will initiate the boot process.

  • Page 66: Working With The Menu Bar

    User’s Manual Working with the Menu Bar Use these keys to move between menus in the Setup Utility. Key Used Description Move to a menu on the left. Left arrow ( ) Move to a menu on the right. Right arrow ( ) Working with the Menu Items Once your desired menu is highlighted, the menu items under the menu will be all listed on the screen.

  • Page 67: Features Of Bios Setup Utility

    Chapter 5. BIOS Utilities Features of BIOS Setup Utility This section gives a short introduction to the most of the features of BIOS Setup Utility. But you can also find helpful information in the “Item Specific Help” each time when you select and highlight an item in the BIOS Setup Utility.
  • Page 68 User’s Manual Ultra DMA Mode Sets the Ultra DMA mode for data transfer to and from the drive. Primary Slave The way to configure the Primary Slave is the same as the Primary Master hard disk if a Primary Slave device exists. Secondary Master Indicates the presence of CD-ROM or DVD-ROM and configures the device.
  • Page 69 Chapter 5. BIOS Utilities PhoenixBIOS Setup Utility Main Main Advanced Security Power Boot Exit Item Specific Help System Time: [13:42:52] System Date: [07/31/2000] <Tab>, <Shift-Tab>, or Legacy Diskette A: [1.44/1.25 MB 3½”] <Enter> selects field. !Primary Master [6945MB] !Primary Slave [None] !Secondary Master [CD-ROM]...

  • Page 70: Advanced Menu

    User’s Manual Advanced Menu I/O Device Configuration Configures serial and parallel ports. The following explains the parameters of this menu item. Serial port A/B Enables or disables the serial ports, or follows the operating system’s configuration. Parallel port Enables or disables the parallel port or follows the operating system’s configuration.

  • Page 71: Reset Configuration Data

    Chapter 5. BIOS Utilities Reset Configuration Data Enables or disables the feature of resetting configuration data area. PhoenixBIOS Setup Utility Main Advanced Advanced Security Power Boot Exit Item Specific Help Setup Warning Setting items on this menu to incorrect values may cause your system to malfunction.

  • Page 72: Security Menu

    User’s Manual Security Menu Supervisor (User) Password Is Displays “Clear” if no password is set or “Set” if a password is already set. Set Supervisor Password Sets the supervisor password by pressing Enter. The supervisor password allows complete access to the BIOS Setup Utility. Set User Password Sets the user password by pressing Enter.
  • Page 73 Chapter 5. BIOS Utilities PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Security Item Specific Help Supervisor Password Is: Clear User Password Is: Clear Supervisor Password controls access to the Set Supervisor Password [Enter] Enter setup utility. Set User Password [Enter] Password on boot: [Disabled]...

  • Page 74: Power Menu

    User’s Manual Power Menu Power Savings Selects the power management mode for the system. Standby Timeout If the system is not used or accessed for the specified period of time, the system will enter the standby mode. Auto Suspend Timeout If the system has entered the standby mode for the period of time specified in this setting, it will enter the configured suspend mode.
  • Page 75 Chapter 5. BIOS Utilities PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Power Item Specific Help Power Savings: [Disabled] Disabled Standby Timeout: [Off] Maximum Power Savings Auto Suspend Timeout: [Off] conserves the greatest Suspend Mode: [Suspend] amount of system power. Hard Disk Timeout: [Disabled] Maximum Performance...

  • Page 76: Boot Menu

    User’s Manual Boot Menu Boot menu is used to set the priority of the boot devices in the order displayed. The menu lists three items: Removable Devices (usually refers to a floppy disk drive), Hard Drive and ATAPI CD-ROM Drive. A plus (+) mark next to menu items indicates the item can be expanded.

  • Page 77: Exit Menu

    Chapter 5. BIOS Utilities Exit Menu Exit Saving Changes Saves the current settings and reboot the system. Exit Discarding Changes Exits without saving any current changes. Load Setup Defaults Sets the current setup to default settings (the original ones found in CMOS). Discard Changes Restores the current setup changes to the previous custom ones.

  • Page 78: Power Management

    User’s Manual Power Management You can manage power consumption while maintaining system performance by setting your computer to one of the available power management modes. Information on the various types of power management are listed below. If you want information on how to set the power management options please refer to the Power Menu in this chapter.

  • Page 79: Suspend And Resume

    Chapter 5. BIOS Utilities Suspend and Resume With these functions you can stop an operation and restart where you left off. The hard disk is turned off, and the CPU is made idle at its slowest speed. All open applications are retained in memory. This system features two suspend mode levels: Power On Suspend (POS), which is called Standby in Widnows, and Suspend to Disk (Save to Disk), which is named Hibernate in Windows.
  • Page 80 User’s Manual Disk mode in your operating system when the battery power is almost de- pleted. But in Windows 98 this feature is available only after you set Suspend mode to “Save To Disk” in BIOS Setup Utility. The feature prevents losing any data due to loss of power.
  • Page 81 Chapter 5. BIOS Utilities - To determine the size of the partition, either press Enter to accept the default settings, or type the size you wish to create in kilobytes (e.g. type 83968 for 82MB because 1MB=1024KB), and press Enter. - Choose 3 to reboot the system.
  • Page 82 User’s Manual Resume from Suspend to Disk Mode The system will resume from Suspend-to-Disk mode by: · Pressing the power button. · Alarm resume (month/day/hour/minute). 5-22...

  • Page 83: Chapter 6. Installing Drivers

    Chapter 6. Installing Drivers Chapter 6. Installing Drivers This chapter provides step-by-step instructions for installing device driv- ers and utilities, for more detailed information please refer to your operat- ing system's manual or the product manual supplied with the device you wish to install.

  • Page 84: Preparation For A New Notebook

    User’s Manual Preparation for a New Notebook Use a bootable floppy disk to start the system. Run FDISK utility from DOS to create a bootable partition. (See DOS manual for the operation detail.) Format hard disk. Follow the command “Format C: /S” to create a bootable hard disk and make the boot system files.

  • Page 85: Installing Windows 98 Se (For Reference Only)

    Chapter 6. Installing Drivers Installing Windows 98 SE (For Reference Only) 1. Start DOS. 2. Insert the Windows 98 CD-ROM. 3. Type “setup”, then press Enter. 4. When the “Windows 98 Setup” program initializes, click Continue. 5. The “License Agreement” dialog box appears. Select “I accept the Agree- ment”...

  • Page 86: Installing Windows 2000 (For Reference Only)

    User’s Manual Installing Windows 2000 (For Reference Only) Note: The installation steps could be a bit different depending on your system’s status. For details, refer to your Windows 2000 manual. Also remember to check the Microsoft web site for any Service Packs for Win- dows 2000 correct any problems you may encounter.
  • Page 87 Chapter 6. Installing Drivers 16.Continue to press Next until Setup starts to install various components, and performs its final tasks. 17.Click Finish to complete Windows 2000 Setup Wizard. 18.The computer will restart Windows 2000 automatically.

  • Page 88: Before Installing Drivers

    User’s Manual Before Installing Drivers Before installing any driver described later in this chapter into your computer, you should always install the 4in1 driver to enhance your computer’s func- tions first. The instructions are as follows: Installing the 4in1 Driver (VIA Service Pack 4.24) Click Start.

  • Page 89: Installing Drivers In Windows 98 Se

    Chapter 6. Installing Drivers Installing Drivers in Windows 98 SE Note: Before installing the VGA driver, please install Microsoft DirectX 7.0 or later. Download the latest DirectX version from the Microsoft web site. Step 1: Installing the VGA Driver Click Start. Select Run.

  • Page 90: Step 3: Installing The Touchpad Driver

    User’s Manual Step 3: Installing the Touchpad Driver Click Start. Select Run. Specify the path to E:\Driver\Touchpad\W98\Setup.exe. Run Setup.exe. Follow the on-screen instructions, and continue to press Next. Click Finish to restart your computer. For more information on the driver, refer to the Readme file under the directory. Note: If you install an external PS/2-type wheel mouse, you may have to install the manufacturer-supplied driver to enable some special features of the mouse.

  • Page 91: Step 5: Installing The Lan Driver

    Chapter 6. Installing Drivers Step 5: Installing the LAN Driver Click Start. Select Settings and Control Panel. Double click the System icon. Click the Device Manager tab. Locate the “PCI Ethernet Controller” under “Other devices”. Double click “PCI Ethernet Controller.” Click the Driver tab and choose Update Driver.

  • Page 92: Step 6: Installing The Dvd Driver (Optional)

    User’s Manual Step 6: Installing the DVD driver (optional) Insert the Win DVD CD-ROM into your drive, The installation program automatically runs when you insert the DVD disk into the DVD-ROM drive. Note: If you intend to connect you notebook computer with external speakers when using the DVD you will need to enable S/PDIF.
  • Page 93 Chapter 6. Installing Drivers 18) Close the Volume Control Window. 19) Start the WinDVD player 20) Go to Propreties button on the DVD player (The Properties button is the force one from the left on the bottom left hand side, moving your pointer over the various buttons will display their names).

  • Page 94: Installing Drivers In Windows 98 Me

    User’s Manual Installing Drivers in Windows 98 ME Note: Before installing the VGA driver, please install Microsoft DirectX 7.0 or later. Download the latest DirectX version from the Microsoft web site. Step 1: Installing the VGA Driver(ATI) Click Start. Select Run. Specify the path to E:\Video\ME\Setup.exe Run Setup.exe.

  • Page 95: Step 3: Installing The Touchpad Driver

    Chapter 6. Installing Drivers Select Next when you see the “The updated driver (recommended) “ESS AllegroPCI Audio (WDM)” Select Next Select Next then wait while the driver is installed Click Finish to complete the setup. Click Close then OK to return to theControl Panel Step 3: Installing the Touchpad Driver Click Start.

  • Page 96: Step 4: Installing The Modem Driver

    User’s Manual Step 4: Installing the Modem Driver Click Start. Select Settings and Control Panel. Double click the System icon. Click the Device Manager tab. Click on “+” to the left of “Other devices”. Double click “PCI Communication Device.” Click the Driver tab and choose Update Driver. Select “Specify the location of the driver (Advanced)”...

  • Page 97: Step 5: Installing The Lan Driver

    Chapter 6. Installing Drivers Step 5: Installing the LAN Driver Click Start. Select Settings and Control Panel. Double click the System icon. Click the Device Manager tab. Click on “+” to the left of “Network adapters”. Double click on “Realtek RTL8139(A/B/C/8130) PCI Fast Ethernet NIC”...

  • Page 98: Step 6: Installing The Dvd Driver (Optional)

    User’s Manual Step 6: Installing the DVD driver (optional) Insert the Win DVD CD-ROM into your drive, The installation program automatically runs when you insert the DVD disk into the DVD-ROM drive. Note: Currently Windows ME does not support S/PDIF, (S/PDIF allows you to connect external speakers to your notebook computer when using the DVD player) so DON”T follow Steps 2 to 23.
  • Page 99 Chapter 6. Installing Drivers Window. Click on the “Advanced” box. 16) Locate “1 Enable S/PDIF” and click on it to select. 17) Select Close 18) Close the Volume Control Window. 19) Start the WinDVD player 20) Go to Propreties button on the DVD player (The Properties button is the force one from the left on the bottom left hand side, moving your pointer over the various buttons will display their names).

  • Page 100: Installing Drivers In Windows 2000

    User’s Manual Installing Drivers in Windows 2000 Step 1: Installing the VGA Driver Click Start. Select Run. Open the path to E:\Driver\Video\W2K\Setup.exe. Run Setup.exe. Follow the on-screen instructions, and continue to press Next or Yes. Click Finish to restart the computer now. Step 2: Installing the Audio Driver Click Start.

  • Page 101: Step 3: Installing The Touchpad Driver

    Chapter 6. Installing Drivers Step 3: Installing the Touchpad Driver Click Start. Select Settings and Control Panel. Double click the System icon. Click the Hardware tab and choose Device Manager. Locate “PS/2 Compatible” under “Mice and other pointing devices”. Click “PS/2 Compatible” with the right button. Choose Properties.

  • Page 102: Step 5: Installing The Lan Driver

    User’s Manual Click the Driver tab and choose Update Driver. Press Next to continue the installation. Select “Search for a suitable driver for my device” and press Next. Select “Specify a location” and press Next. Choose Browse to specify the path to E:\Driver\Modem\W2K. Press Open.

  • Page 103: Step 6: Installing The Dvd Driver (Optional)

    Chapter 6. Installing Drivers Choose Browse to specify the path to E:\Driver\LAN\Win2000. Press Open. Click OK. Click Next to install the driver. Click Finish to complete the setup. Close the Properties window and restart your computer. Step 6: Installing the DVD driver (optional) Insert the Win DVD CD-ROM into your drive, The installation program automatically runs when you insert the DVD disk into the DVD-ROM drive.
  • Page 104 User’s Manual (Enable S/PDIF continued) After Windows restarts: 11) Go to the Audio icon located on the task bar. 12) Right click the Audio icon and select “Open Volume Controls” 13) Click on Options from the Menu Bar 14) Click on Advanced Controls. 15) An “Advanced”...

  • Page 105: Installing Drivers In Windows Nt4.0

    Chapter 6. Installing Drivers Installing Drivers in Windows NT4.0 Note 1: After installing Windows NT4.0, please install the latest Service Pack to enhance the function. Download the latest Service Pack version from the Microsoft web site. Note 2: Before installing the following drivers, press F2 to enter the BIOS Setup Utility when the computer boots.

  • Page 106: Step 3: Installing The Touchpad Driver

    User’s Manual Step 3: Installing the Touchpad Driver Click Start. Select Settings and Control Panel. Double click the Mouse icon. Click the General tab. Click Change. Click Have Disk. Choose Browse and specify the path to E:\Driver\Touchpad\Nt40. Press Open. Choose OK. Press OK again.

  • Page 107: Step 5: Installing The Lan Driver

    Chapter 6. Installing Drivers Press Next. Select the same port you choose in the earlier step, and click Next. Click Finish to complete the setup. Close the Properties window and click Finish to restart your com- puter. Fore more information on the driver, refer to the Readme file under the directory. Step 5: Installing the LAN Driver Click Start.

  • Page 108: Chapter 7. Troubleshooting

    Chapter 7. Troubleshooting Chapter 7. Troubleshooting Should you have any problems with your computer, before consulting the com- puter vendor, you may want to solve the problem yourself. This chapter lists some common problems and their possible solutions. Battery Power Hard Disk Drive Floppy Disk Drive Hardware Installation...

  • Page 109: Audio

    User’s Manual Audio Problem: The speaker cannot be heard. Solution: The volume might be set too low, please check the volume control. Problem: The volume is too high (or too low). Solution: The volume is not correctly set, please check the volume control. Problem: The headphone doesn’t work.
  • Page 110 Chapter 7. Troubleshooting Problem: A beeping sound is heard and the low-battery indicator is on. Solution: The battery power is nearly used up. Connect the AC adapter to your computer or press the Fn + Esc key combination to enter suspend mode. Problem: A beep isn’t heard when the low-battery indicator turns on, or the gauge indicates power is less than 10%.

  • Page 111: Boot Password

    User’s Manual Boot Password Problem: You forget the boot password. Solution: If you forget the password, you may have to discharge the battery of the CMOS. Call your vendor for help. Problem: The compact disk tray will not open when there is a disk in the tray.

  • Page 112: Floppy Disk Drive (Fdd)

    Chapter 7. Troubleshooting to your operating system manual for more information on the software and make sure you have the proper software installed for using compact disks. If the correct software is properly installed, contact your vendor about a hardware problem.

  • Page 113: Hardware Installation

    User’s Manual Hardware Installation Problem: The computer will not recognize the device as part of the system. Solution 1 : The new device is not powered on, please power on the device, then restart the computer. Solution 2: You did not properly configure the system for the new device or install the device.

  • Page 114: Memory Module

    Chapter 7. Troubleshooting Memory Module Problem: The computer will not boot. Solution: An incorrect type of memory module is installed. Make sure a correct module is installed. Problem: The memory capacity is insufficient. Solution: The memory is not correctly configured for the application. Maksure the memory is correctly configured for the application.

  • Page 115: Pc Card

    User’s Manual PC Card Problem: The PC card cannot be configured. Solution: The PC card is not supported. Problem: The system cannot recognize the PC card. Solution 1: The PC card is not inserted into the socket or inserted incorrectly. Solution 2: The PC card driver is not installed.

  • Page 116: Printer

    Chapter 7. Troubleshooting Printer Problem: The printer cannot be added to the system. Solution: The printer power is off or the printer is not correctly connected to the computer. Problem: The printer will not work. Solution 1: The printer is not turned on, please turn on the printer. Solution 2: The printer is not properly connected.
  • Page 117 Glossary Glossary AC (Alternating Current) ¾ The power from a standard household electrical outlet. adapter ¾ An AC adapter converts AC current to DC current. AGP (Accelerated Graphics Port) ¾ A high-speed graphics port that provides a direct connection between the display adapter and memory. application ¾...
  • Page 118 User’s Manual driver ¾ A program that controls a device. DVD ¾ Originally called Digital VideoDisc since it was used mostly for video, now called Digital Versatile Disc, similar to a CD-ROM only with greater storage capacity. flash BIOS ¾ BIOS which can be updated. flash memory ¾...
  • Page 119 Glossary link. LCD (Liquid Crystal Display ) ¾ A display technology that uses rod-shaped molecules (liquid crystals) that flow like liquid and bend light. LED (Light Emitting Diode) ¾ An electronic device that lights up when electricity is passed through it. The indicator lights on the computer are LEDs. load ¾...
  • Page 120 User’s Manual POST (Power On Self Test) ¾ A series of built-in diagnostics that are performed when the computer is booted. RAM (Random Access Memory) ¾ The memory available to programs, different programs will need more or less RAM depending on what they are doing. ROM (Read Only Memory) ¾...

  • Page 121: Appendix A. Specification

    Appendix A. Specifications Appendix A. Specification Processor - Intel Celeron 566/600/633/667/700/733/766/800 MHz - Intel Pentium !!! 500/533/550/600/650/667/700/733/750/800/850/866 MHz - CPU Package: Socket-370 (FCPGA) Memory - Two 144-pin SO-DIMM sockets - Support PC-133/PC-100 SDRAM - Provide 64 bit data bus system memory - Expandable up to 512MB, depending on 32/64/128/256 MB SO-DIMM modules BIOS - Phoenix BIOS with Smart Battery, Plug and Play (1.0a)

  • Page 122: Pc Card Sockets

    User’s Manual Storage - Removable 3.5” 3-mode FDD, interchageable with 15mm (h) Zip 250MB/100MB Drive (IO MEGA), or 2.5” 12.7mm (h)/12.5mm (h) secondary IDE HDD - Removable 24X speed CD-ROM, interchangeable with DVD-ROM or CD-RW - Removable 2.5” 9.5mm/12.7mm/17.0mm (h) HDD - Support DMA mode 2/PIO mode 4/ATA-33/ATA-66 IDE HDD Audio - AC 97 Compliant...
  • Page 123 Appendix A. Specifications - One speaker-out jack - One jack for microphone / S/P-DIF output - One RJ-11 jack for 56K MDC Modem - One RJ-45 jack for 100M/10M LAN - One (120 pins) connector for Port Replicator - DC-in jack Communications - Wireless Infrared transfer IrDA 1.1, 1cm~1M operating distance, 4Mbps FIR - 56K MDC Modem with V.90 compliant...
  • Page 124 User’s Manual Environment - Temperature: Operating: 5° C ~ 35° C Non-operating: -20°C ~ 60°C - Relative Humidity: Operating: 20%~80% Non-operating: 10%~90% Optional - 3002 Lithium-Ion smart battery pack - 8006A Port Replicator - 8007 IO Mega 100MB ZIP Drive - 800D DVD-ROM Driver Module 12.7mm (h) - 800E CD-RW Driver Module 12.7mm (h) - 800F Software DVD Player...

  • Page 125: Appendix B. Battery Information

    Appendix B. Battery Information Appendix B. Battery Information Please follow these simple guidelines to get the best use out of your battery. New Battery: Always use a new battery before recharging it. Battery Life: Battery life may be shortened through improper maintenance. To optimize the life and improve the performance of your battery, fully discharge and recharge the battery at least once every 30 days.

  • Page 126: Conserving Battery Power

    User’s Manual How do I maintain the battery ? Completely discharge and charge the battery at least once every 30 days or after about 20 partial discharges. Conserving Battery Power: Advanced Power Management: Your notebook computer has Advanced Power Management (APM) features which slow down the speed of the processor and components when the system is inactive.

  • Page 127: Appendix C. Different Versions Of Keyboards

    Appendix C. Different Versions of Keyboards Appendix C. Different Versions of Key- boards Below are different versions of keyboards for your reference: Germany Keyboard French Keyboard...
  • Page 128 User’s Manual Japanese Keyboard Chinese Keyboard...

Table of Contents