Upgrading the Primary Drive Bay (Bay
One) CD Device
The interchangeable CD device installed in the primary drive bay
(Bay One) on the right/front (as you look at the left side of the com-
puter) will depend on what configuration you purchased. If you wish
to change or upgrade this device follow this procedure.
1. Turn the computer OFF.
2. Place the computer on a clean, stable surface and turn it over.
3. Remove screws
1
4. Lift the cover off the changeable drive bay and set it aside.
-
.
3
Upgrading the Primary Drive Bay (Bay One) CD Device 7 - 3
Upgrading The Computer
Figure 7 - 1
Screw Location
1
2
3
7
Need help?
Do you have a question about the 888E DREAM MACHINE and is the answer not in the manual?
Questions and answers