Power Menu; Enable Hyper Threading (Power Menu) - EUROCOM 888E DREAM MACHINE User Manual

Power Menu.

SystemSoft SCU For Intel chipset
Startup
Disks Components
Devices
Floppy Drive A = 1.44M
Hard Drive C = 30007
Hard Drive D = 0 MB
Hard Drive E = 0 MB
Hard Drive F = 0 MB
Serial Port 1 = COM 1, 3F8, IRQ 4
Serial Port 2 = COM 2, 2F8, IRQ 3
Parallel Port = LPT1, Addr 378, IRQ 7
Set power saving to lowest settings

Enable Hyper Threading (Power Menu)

You can enable (the default setting is disabled) Hyper-Threading if
your computer has an Intel Pentium® 4 Processor with Hyper-
Threading Technology, running the Windows XP OS. Hyper-
Threading will increase performance of your computer depending on
the hardware and software you use. If you do not have a Processor
with Hyper-Threading Technology, this menu option will not ap-
pear. DO NOT enable this option in Windows 2000. Once you
have enabled Hyper-Threading, DO NOT disable the option.
Oct 15, 2002 9:40:02 am
Power
Exit
_ Low Power Saving
System m m
_ Medium
Power Saving
_ High
B B Power Saving
MB
√
Customize
CPU Cl l lock
√
Enable Hyper Threading
Memory
Base
Extended
Shadow
Reserved
Total RAM
Cache (Ext) =
= 2260MHz
To use Hyper-Threading you
must have a computer with a
Pentium 4 Processor with
Hyper-Threading Technol-
= 640 KB
ogy, running the Windows
= 261120 KB
= 64 KB
XP OS. The menu option will
= 320 KB
= 262144 KB not appear if your CPU does
512 KB
not support Hyper-Threading.
If you are updating your
BIOS from a previous version
which did not have the Hyper-
Threading option, you must
reinstall Windows XP after
you have updated your
BIOS. After installing Win-
dows XP you must install the
latest versions of the mo-
dem & video drivers (check
with your service center).
If you are changing your pro-
cessor from a cpu which sup-
ports
one which does not, you will
need to reinstall your OS.
BIOS Utilities
Figure 5 - 6
Power Menu
Hyper-Threading
Hyper-Threading, to
Power Menu. 5 - 17
5