EUROCOM 888E DREAM MACHINE User Manual page 218

Problem Possible Cause
The printer is a network
printer and it is not properly
connected to the network.
The operation mode for the
parallel port set in the BIOS
doesn't correspond with the
mode your printer can work
with.
Possible Solution
All networks are configured differently so please check
with your network administrator to get the correct
setup.
The default operation mode for the parallel port (ECP)
is backward compatible with other operation modes
used by older printers and will usually not need to be
changed. However some very old printers may require
specific settings. Please check your printer manual to
find out which mode your printer uses. Check that the
settings in the BIOS (see "Components Menu" on
page 5 - 16) correspond with those indicated in your
printer manual.
Troubleshooting
Printer 8 - 23
8